Order Products : sales@su-jiao.com
LAMIGAMID® 1200
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | Schwartz Technical Plastic |
| Trademark: | LAMIGAMID® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | y6nwzd_LAMIGAMID-1200.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Applications:
|
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.03 | g/cm³ | ISO 1183 |
| Water Absorption | ISO 62 | ||
| 23°C, 24 hr | 0.90 | % | ISO 62 |
| Saturated, 23°C | 1.4 | % | ISO 62 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Ball Indentation Hardness | 100 | MPa | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2000 | MPa | ISO 527-2 |
| Tensile Stress | ISO 527-2 | ||
| Yield | 60.0 | MPa | ISO 527-2 |
| Fracture | 90.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | > 20 | % | ISO 527-2 |
| Flexural Modulus | 2000 | MPa | ISO 178 |
| Compressive Stress | ISO 604 | ||
| 20% strain | 76.0 | MPa | ISO 604 |
| 10% strain | 56.0 | MPa | ISO 604 |
| 5% strain | 38.0 | MPa | ISO 604 |
| Coefficient of Friction (vs. Steel - Static) | 0.38 | ASTM D1894 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | > 10 | kJ/m² | ISO 180 |
| Unnotched Izod Impact Strength | No Break | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 190 | °C | ISO 75-2/B |
| Melting Temperature (DSC) | 190 | °C | ISO 3146 |
| CLTE - Flow (20 to 100°C) | 8.0E-5 - 1.0E-4 | cm/cm/°C | ISO 11359-2 |
| Specific Heat | 2500 | J/kg/°C | ASTM C351 |
| Thermal Conductivity | 0.25 | W/m/K | ISO 8302 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+12 | ohms | IEC 60093 |
| Dielectric Strength | 35 | kV/mm | IEC 60243-1 |
| Dielectric Constant | 3.50 | IEC 60250 | |
| Dissipation Factor | 0.040 | IEC 60250 |
| Additional Information |
|---|
| Penetration Resistance, DIN 53482: 1E14 ohm-cmCreepage/leakage Resistance: KA3bSafe Temperature Range, short periods: 150°CSafe Temperature Range, permanent: 120°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 284 C TFE 15 | RTP Company | Nylon 11 | RTP |
| Ad-Tech Polyester NO. 14 | Ad-Tech Plastic Systems Corp. | Polyester, TS | Ad-Tech Polyester |
| Andur 8000 AP/Curene® 442 | Anderson Development Company | PUR-Ether/TDI | Andur |
| BULKSAM® TML-19F | UMG ABS, Ltd. | ABS | BULKSAM® |
| OXNILON 66 ST 33GF | Oxford Polymers | Nylon 66 | OXNILON 66 |
