Order Products : sales@su-jiao.com
RELENE® B56003
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | RELENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nWPWgC_RELENE-B56003.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| B56003 is a High Density Polyethylene (HDPE) grade suitable for general purpose extrusion blow moulding applications. Articles blown from this grade exhibit good stiffness. The resin offers good melt strength, ESCR and impact resistance and typically used for packaging of oil, vanaspati, general purpose containers, jerry can, etc. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.956 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 1.5 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 69 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 26.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, Injection Molded) | 550 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 900 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 128 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TUFNYL® SGF 30 TRAFFIC GREY | SRF Ltd. | Nylon 6 | TUFNYL® |
| ULTEM™ JD7201 resin | SABIC Innovative Plastics Asia Pacific | PEI | ULTEM™ |
| Nanjing Hongrui PA6 B303 | Nanjing Hongrui Engineering Plastics Co., Ltd. | Nylon 6 | Nanjing Hongrui PA6 |
| Generic ABS+SAN | Generic | ABS+SAN | Generic |
| EPO-TEK® OG133-8 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
