Order Products : sales@su-jiao.com

Shin-Etsu Elastomer KE-1950-30A/B

Category:	Silicone Rubber, HTV , Silicone Rubber, HTV
Manufacturer:	Shin-Etsu Silicones of America
Trademark:	Shin-Etsu Elastomer
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	LDZIfx_Shin-Etsu-Elastomer-KE-1950-30A-B.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Shin-Etsu KE-1950-30 is a liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KE-1950-30 is low enough to allow easy pumping through most injection molding systems. Rapid cure time at elevated temperature. Long pot life at room temperature. Typical Applications O-rings. - Diaphragms. Capping. Rubber rollers. Connector packings. Other electrical parts

Message

Shin-Etsu KE-1950-30 is a liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KE-1950-30 is low enough to allow easy pumping through most injection molding systems.

Rapid cure time at elevated temperature.

Long pot life at room temperature.

Typical Applications

O-rings. - Diaphragms.

Capping.

Rubber rollers.

Connector packings.

Other electrical parts

General Information
Features	Low viscosity Workability, good Fast curing
Uses	Electrical/Electronic Applications Electrical components Diaphragm Roller Shield
Agency Ratings	FDA not rated USP Class VI
Forms	Liquid
Processing Method	Liquid Injection Molding (LIM)

Physical	Nominal Value	Unit
Specific Gravity	1.10	g/cm³

Hardness	Nominal Value	Unit
Durometer Hardness	32

Elastomers	Nominal Value	Unit
Tensile Stress (100% Strain)	0.696	MPa
Tensile Strength	8.80	MPa
Tensile Elongation (Break)	700	%
Tear Strength ¹	25.0	kN/m
Compression Set (180°C, 22 hr)	6.0	%

Thermoset	Nominal Value	Unit
Post Cure Time (200°C)	4.0	hr

Additional Information
Press Cure / Post Cure: Press/Post

Uncured Properties	Nominal Value	Unit
Curing Time	0.083	hr

Note Message
1 .	B mould

Resin Grade	Manufacturer	Category	Trademark
Nypol® PA B3 G23 NTLA010 NT302	Petropol Industry and Trade of Polymers LTDA	Nylon 6	Nypol® PA
CYCOLAC™ FXS610SK resin	SABIC Innovative Plastics Europe	ABS	CYCOLAC™
LTP ZE-2601 Al2O3/GF 30%	Chengdu Letian Plastics Co., Ltd	TP, Unspecified	LTP
PENTAMID AB MA30T H grau 7035/1	PENTAC Polymer GmbH	Nylon 66/6	PENTAMID AB
POLYfill PPHC GF3020 PB7	Polykemi AB	PP, Unspecified	POLYfill