Category: | PP, Unspecified , Polypropylene |
Manufacturer: | PolyOne Corporation |
Trademark: | Maxxam™ |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | YmzO1g_Maxxam-PP6-BK021.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
Mineral reinforced PP, heat resistant |
General Information | |
---|---|
Filler / Reinforcement |
|
Features |
|
Appearance |
|
Processing Method |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
Molding Shrinkage | 0.80 - 1.2 | % | ASTM D955 |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Strength 1 | 30.0 | MPa | ASTM D638 |
Flexural Modulus 2 | 2050 | MPa | ASTM D638 |
Flexural Strength 3 | 40.0 | MPa | ASTM D638 |
Impact | Nominal Value | Unit | Test Method |
---|---|---|---|
Notched Izod Impact | 30 | J/m | ASTM D256 |
Thermal | Nominal Value | Unit | Test Method |
---|---|---|---|
Heat Deflection Temperature (0.45 MPa, Unannealed) | 115 | °C | ASTM D648 |
Electrical | Nominal Value | Unit | Test Method |
---|---|---|---|
Surface Resistivity | > 1.0E+12 | ohms | ASTM D257 |
Flammability | Nominal Value | Unit | Test Method |
---|---|---|---|
Flame Rating (1.60 mm) | HB | Internal method |
Injection | Nominal Value | Unit | |
---|---|---|---|
Drying Temperature | 80.0 - 85.0 | °C | |
Drying Time | 4.0 - 6.0 | hr | |
Processing (Melt) Temp | 200 - 240 | °C | |
Mold Temperature | 30.0 - 60.0 | °C |
Injection instructions |
---|
Injection Pressure: MED-HIGHHold Pressure: MED-HIGHScrew Speed: MODERATEBack Pressure: LOW |
Note Message | |
---|---|
1 . | 50 mm/min |
2 . | 1.3 mm/min |
3 . | 1.3 mm/min |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
Ravamid® AGF15 BK45 | Ravago Group | Nylon 66 | Ravamid® |
4MID® 9A22115 H | 4Plas | Nylon 66 | 4MID® |
APEX® 3703-92NT1 | Teknor Apex Company | PVC, Flexible | APEX® |
Andur AL 62 DP | Anderson Development Company | PUR-Eth,aliphat | Andur |
Firepel® K130-PTE-12 | AOC, L.L.C. | Polyester Alloy | Firepel® |