Order Products : sales@su-jiao.com
Integra™ POK 9060 FC1 WTL80510
| Category: | PK , Polyketone |
| Manufacturer: | PolySource, LLC |
| Trademark: | Integra™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VEd5Ii_IntegraPOK9060FC1WTL80510.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polyketone, LF, FDA compliant, custom white |
| General Information | |
|---|---|
| Agency Ratings |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.24 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (240°C/2.16 kg) | 6.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.18 mm) | 0.18 - 2.0 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.50 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 107 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break, 23°C) | 60.7 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 200 | % | ASTM D638 |
| Flexural Modulus | 1570 | MPa | ASTM D790 |
| Flexural Strength | 60.0 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 104 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCANAMID 66 A53^EM | Polykemi AB | Nylon 66 | SCANAMID 66 |
| Tecolen® CP20 GR20 NL XC30 | Eurotec Engineering Plastics | PP Copolymer | Tecolen® |
| NuSil MED-6385 | NuSil Technology | Silicone | NuSil |
| Nylfor® A2 E2/2E NERO | SO.F.TER. SPA | Nylon 66 | Nylfor® |
| LNP™ LUBRICOMP™ IFL36R compound | SABIC Innovative Plastics Europe | Nylon 612 | LNP™ LUBRICOMP™ |
