Order Products : sales@su-jiao.com
EnCom GF10 PPE-PS
| Category: | PPE+PS , Polyphenylene Ether + PS |
| Manufacturer: | EnCom, Inc. |
| Trademark: | EnCom |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | AFF27n_EnCom-GF10-PPE-PS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 10% Glass Filled PPE/PS |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.12 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 0.30 to 0.50 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.10 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 68.3 | MPa | ASTM D638 |
| Flexural Modulus | 3650 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 59 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 121 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 98.9 to 110 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Drying Time, Maximum | 7.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Suggested Shot Size | 40 to 75 | % | |
| Rear Temperature | 249 to 304 | °C | |
| Middle Temperature | 260 to 310 | °C | |
| Front Temperature | 271 to 316 | °C | |
| Nozzle Temperature | 282 to 316 | °C | |
| Processing (Melt) Temp | 282 to 316 | °C | |
| Mold Temperature | 76.7 to 104 | °C | |
| Back Pressure | 0.345 to 0.689 | MPa | |
| Screw Speed | 20 to 100 | rpm | |
| Vent Depth | 0.038 to 0.076 | mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P3950CT | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| RTP 1400 TFE 15 SI 2 | RTP Company | PESU | RTP |
| WPP PP PPC3TF1.3-Natural | Washington Penn Plastic Co. Inc. | PP Copolymer | WPP PP |
| NOVALAC RX®790 | Vyncolit N.V. | Phenolic | NOVALAC |
| Lucofin® 1413-t2 | Lucobit AG | Polyolefin, Unspecified | Lucofin® |
