Order Products : sales@su-jiao.com

KetaSpire® KT-880 CF40

Category:	PEEK , Polyetheretherketone
Manufacturer:	Solvay Specialty Polymers
Trademark:	KetaSpire®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	BQCTuA_KetaSpireKT880CF40.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

KetaSpire KT-880 CF30 is a high fluidity, 30% carbon fiber reinforced polyether ether ketone (PEEK). When the temperature is close to 300 ℃, the mechanical properties of carbon fiber reinforced KetaSpire PEEK reach the highest level in the industry and have the lowest linear thermal expansion coefficient of KetaSpire product series. KetaSpire PEEK is processed according to the highest industry standards and is characterized by various excellent properties, including excellent wear resistance, first-class fatigue resistance, easy melt processing, high purity, excellent resistance to organic matter, acids and alkalis and other chemicals. These characteristics make it very suitable for medical care, transportation, electronics, chemical processing and other industrial applications.

General Information
Filler / Reinforcement	Carbon fiber reinforced material, 40% filler by weight
Features	Good dimensional stability Electron beam disinfection Radioactive permeable Radiation disinfection Rigidity, high High strength Pressure cooker disinfection Good disinfection Ethylene oxide disinfection Anti-gamma radiation High liquidity Good chemical resistance Fatigue resistance Heat resistance, high Steam resistance thermal disinfection Disinfect with steam Flame retardancy
Uses	Films Pump parts Electrical/Electronic Applications Aircraft applications Industrial application Connector Seals Oil/Gas Supplies Surgical instruments Dental application field Medical/nursing supplies Medical equipment Medical devices
RoHS Compliance	Contact manufacturer
Appearance	Black
Forms	Particle
Processing Method	Machining Profile extrusion molding Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.46	g/cm³	ASTM D792

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	33000	MPa	ASTM D638
Tensile Strength	258	MPa	ASTM D638
Tensile Elongation ¹(Break)	1.6	%	ASTM D638
Flexural Modulus	30000	MPa	ASTM D790
Flexural Strength	386	MPa	ASTM D790
Flexural Elongation at Break	1.8	%	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	80	J/m	ASTM D256
Unnotched Izod Impact	750	J/m	ASTM D4812

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Annealed)	332	°C	ASTM D648

Fill Analysis	Nominal Value	Unit	Test Method
Melt Viscosity (400°C, 1000 sec^-1)	490	Pa·s	ASTM D3835

Injection	Nominal Value	Unit
Drying Temperature	150	°C
Drying Time	4.0	hr
Rear Temperature	365	°C
Middle Temperature	370	°C
Front Temperature	375	°C
Nozzle Temperature	380	°C
Mold Temperature	175 - 205	°C
Injection Rate	Fast
Screw Compression Ratio	2.5:1.0 - 3.5:1.0

Note Message
1 .	5.0 mm/min

Resin Grade	Manufacturer	Category	Trademark
RTP 381 TFE 15	RTP Company	PC	RTP
DJSilicone NE-5160	DONGJUE SILICONE (NANJING) CO., LTD	Silicone	DJSilicone
Electrafil® ABS CF15 FR BK	Techmer Engineered Solutions	ABS	Electrafil®
Kinta NI6600	Kinta Technology (Hong Kong) Co., Ltd.	Nylon 66	Kinta
Sylvin 9950-75 BLACK	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin