Order Products : sales@su-jiao.com
Avantra® 8530B
| Category: | PS (HIPS) , High Impact Polystyrene |
| Manufacturer: | PMC Group Polymer Products |
| Trademark: | Avantra® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 6DBvsX_Avantra-8530B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Avantra® 8530B is an ignition resistant grade of high impact polystyrene with exceptional moldability. It is free of polybrominated diphenylethers and meets UL94V-0 (@ 0.062"/1.5 mm min.) rating. It gives exceptional moldability while maintaining good mechanical and heat resistance properties. Applications Avantra® 8530B is best suited for gas-assist molding applications of large size electronic/electrical enclosures. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.14 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 13 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.30 to 0.60 | % | ASTM D955 |
| Water Absorption | ASTM D570 | ||
| Saturation | < 0.15 | % | |
| Equilibrium, 23°C, 50% | < 0.10 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 23.0 | MPa | |
| Break | 19.0 | MPa | |
| Tensile Elongation (Yield) | 55 | % | ASTM D638 |
| Flexural Modulus 1 | 2070 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 120 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 75.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 95.0 | °C | ASTM D1525 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating 2 | UL 94 | ||
| 1.50 mm, ALL | V-0 | ||
| 2.60 mm, NC | 5VB | ||
| 3.00 mm, BK | 5VB | ||
| 5.50 mm, ALL | 5VA |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 200 to 240 | °C |
| Note Message | |
|---|---|
| 1 . | Method I (3 point load) |
| 2 . | Solid |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Network Polymers SAN 279 | Network Polymers, Inc. | SAN | Network Polymers SAN |
| CompaMid® PA 6 GK 30 | DimeLika Plast GmbH | Nylon 6 | CompaMid® |
| ExxonMobil™ LDPE LD 157CW Wire & Cable | ExxonMobil Chemical | LDPE | ExxonMobil™ LDPE |
| Plenco 06401 (Transfer) | Plastics Engineering Co. | Phenolic | Plenco |
| Aquivion® PW79S-Li | Solvay Specialty Polymers | PFSA Lithium Salt | Aquivion® |
