Order Products : sales@su-jiao.com
RTP 1500-30D UV
| Category: | TEEE , Thermoplastic Elastomer, Ether-Ester |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GfmnHV_RTP-1500-30D-UV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| UV Stabilized |
| General Information | |
|---|---|
| Additive |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.07 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 0.50 - 2.0 | % | ASTM D955 |
| Moisture Content | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 30 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 24.1 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 600 | % | ASTM D638 |
| Flexural Strength | 27.6 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.20 mm) | No Break | ASTM D256 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 98.9 | °C | |
| Drying Time | 2.0 - 3.0 | hr | |
| Processing (Melt) Temp | 191 - 210 | °C | |
| Mold Temperature | 21.1 - 48.9 | °C | |
| Injection Pressure | 68.9 - 103 | MPa |
| Injection instructions |
|---|
| Desiccant Type Dryer Required. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sevrene® 3582-70A | Vi-Chem Corporation | TPE | Sevrene® |
| Tarnoform® 500 LS | Grupa Azoty S.A. | Acetal (POM) Copolymer | Tarnoform® |
| Ferro PP NPP00GC16NA | Ferro Corporation | PP Homopolymer | Ferro PP |
| Generic Nylon 66 - Glass Bead | Generic | Nylon 66 | Generic |
| Honghai CPE 135A | Weifang Honghai Plastics Technology Co., Ltd. | CPE | Honghai |
