Order Products : sales@su-jiao.com
ESTABLEND 8500 VO
| Category: | ASA+PC , Acrylonitrile Styrene Acrylate + PC |
| Manufacturer: | Cossa Polimeri S.r.l. |
| Trademark: | ESTABLEND |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zxDua8_ESTABLEND-8500-VO.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ESTABLEND 8500 VO is an acrylonitrile-styrene-acrylate PC (ASA PC) product,. It is available in Europe. ESTABLEND 8500 VO applications include electrical/electronic applications, electrical appliances and engineering/industrial accessories. Features include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 1.20 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (260°C/5.0 kg) | 25 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.50 - 0.70 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 65.0 | MPa | ASTM D638 |
| Fracture | 55.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 50 | % | ASTM D638 |
| Flexural Modulus | 2500 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| 0°C | 550 | J/m | ASTM D256 |
| 23°C | 500 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | |||
| -- | 140 | °C | ASTM D1525 2 |
| -- | 135 | °C | ASTM D1525 3 |
| Ball Pressure Test (125°C) | Pass | IEC 60335-1 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.60 mm | V-0 | UL 94 | |
| 3.20 mm | V-0 | UL 94 | |
| Glow Wire Ignition Temperature (2.00 mm) | 960 | °C | IEC 60695-2-12 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Mold Temperature | 55.0 - 70.0 | °C | |
| Injection Rate | Moderate |
| Injection instructions |
|---|
| Injection Temperature: 220-250°CInjection Pressure Level: Medium |
| Note Message | |
|---|---|
| 1 . | 23°C |
| 2 . | 标准 B (120°C/h), 压 力1 (10N) |
| 3 . | 标准 B (120°C/h), 载荷2 (50N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4605 HI | RTP Company | SPS | RTP |
| Celstran® PP-GF40-0414 P10/10 | Celanese Corporation | PP, Unspecified | Celstran® |
| Globalene® BA45H | Lee Chang Yung Chemical Industry Corp. | PP Alloy | Globalene® |
| PHOENIX™ 8652 | Phon Tech Industrial Company | TPE | PHOENIX™ |
| Hytrel® 3046 NC010 | DuPont Performance Polymers | TPC-ET | Hytrel® |
