Order Products : sales@su-jiao.com

NuSil MED15-2980

Category:	Silicone Rubber, LSR , Silicone Rubber, LSR
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	zTPneo_NuSil-MED15-2980.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications. Liquid silicone rubbers, or LSRs, are elastomer systems reinforced with silica. They contain functional polymers of lower average molecular weight and viscosity when compared to high consistency rubbers (HCRs). They are typically supplied as two-component systems and formulated in a 1:1 mix ratio. Because their consistency is akin to petroleum jelly, they are often pumped with injection molding equipment to form molded components such as o-rings, gaskets, valves, seals, and other precision molded parts. LSRs are designed for liquid injection molding (LIM) processes which may utilize single or multi-cavity molds, or for overmolding processes. Originally designed for automated systems, they are developed with high volume applications in mind and benefit from their high strength.

Message

NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.

Liquid silicone rubbers, or LSRs, are elastomer systems reinforced with silica. They contain functional polymers of lower average molecular weight and viscosity when compared to high consistency rubbers (HCRs). They are typically supplied as two-component systems and formulated in a 1:1 mix ratio. Because their consistency is akin to petroleum jelly, they are often pumped with injection molding equipment to form molded components such as o-rings, gaskets, valves, seals, and other precision molded parts.

LSRs are designed for liquid injection molding (LIM) processes which may utilize single or multi-cavity molds, or for overmolding processes. Originally designed for automated systems, they are developed with high volume applications in mind and benefit from their high strength.

General Information
Filler / Reinforcement	Silica
Features	Fast Cure Good Colorability High Strength Thermally Conductive
Uses	Gaskets Medical/Healthcare Applications Overmolding Seals Valves/Valve Parts
Agency Ratings	USP Class VI
Forms	Liquid
Processing Method	Liquid Injection Molding (LIM)

Thermal	Nominal Value	Unit
Thermal Conductivity	1.6	W/m/K

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 15
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum

Uncured Properties	Nominal Value	Unit
Density	1.53	g/cm³
Curing Time (150°C)	0.50	hr
Pot Life (25°C)	240	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	80
Tensile Strength	2.07	MPa
Tensile Elongation at Break	20	%

Resin Grade	Manufacturer	Category	Trademark
TOTAL Polypropylene PPH 4026	TOTAL Refining & Chemicals	PP Homopolymer	TOTAL Polypropylene
Advanced Composites ATX904-20	Advanced Composites, Inc.	PP, Unspecified	Advanced Composites
HiFill® POM HO IM3	Techmer Engineered Solutions	Acetal (POM) Homopolymer	HiFill®
Sylvin 8378-85 Green 3195	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
3M™ Dyneon™ Fluoroelastomer FE 5840Q	3M Advanced Materials Division	Fluorelastomer	3M™ Dyneon™ Fluoroelastomer