Order Products : sales@su-jiao.com
Dryflex® 662750S
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | ELASTO |
| Trademark: | Dryflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zHx17W_Dryflex-662750S.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Dryflex 662750S: Thermoplastic Elastomer Base Material: TPS-SEBS Hardness: 75 Shore A Service Temperature Range: -50 to +125°C (Unstressed Material). Colour: Black Presentation: Free flowing pellets that can be processed without predrying when stored under normal conditions Weather Resistance: Excellent Ozone-/UV- Resistance: Excellent Chemical Resistance: Good (excluding organic solvents, aromatic- and vegetable oils) Recycling: 100% recyclable Mould Shrinkage (linear): Appr. 0.75 - 2% depending on e.g. shape of the detail and placement of gate Bonds to: PP, PE |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.05 | g/cm³ | ISO 2781 |
| Molding Shrinkage | 0.75 to 2.0 | % | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 75 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 37 | ||
| 100% Strain | 3.00 | MPa | |
| 300% Strain | 5.00 | MPa | |
| Tensile Stress (Yield) | 9.00 | MPa | ISO 37 |
| Tensile Elongation (Break) | > 600 | % | ISO 37 |
| Tear Strength 1 | 33 | kN/m | ISO 34-1 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 180 to 210 | °C | |
| Middle Temperature | 180 to 210 | °C | |
| Front Temperature | 180 to 210 | °C | |
| Mold Temperature | 30.0 to 60.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 150 to 210 | °C | |
| Cylinder Zone 2 Temp. | 150 to 210 | °C | |
| Cylinder Zone 3 Temp. | 150 to 210 | °C | |
| Cylinder Zone 4 Temp. | 150 to 210 | °C | |
| Cylinder Zone 5 Temp. | 150 to 210 | °C |
| Note Message | |
|---|---|
| 1 . | Method C, Crescent |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PROTEQ™ APH8400 | Marplex Australia Pty. Ltd. | PP Homopolymer | PROTEQ™ |
| RTP ESD C 2180 | RTP Company | PEI | RTP |
| AKROMID® A3 black (3706) | AKRO-PLASTIC GmbH | Nylon 66 | AKROMID® |
| Isocor™ 653 | Shakespeare Monofilaments and Specialty Polymers | Nylon 6 | Isocor™ |
| LNP™ THERMOCOMP™ RZ006SXP compound | SABIC Innovative Plastics | Nylon 66 | LNP™ THERMOCOMP™ |
