Order Products : sales@su-jiao.com
apifive® 1505-350
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | API SpA |
| Trademark: | apifive® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | zAoPZi_apifive-1505-350.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| apifive®1505-350 is a polyolefin product,. It can be processed by injection molding and is available in Europe. Typical application areas are: consumer goods. The main characteristics are: crosslinkable. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.340 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 54 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 3.30 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 350 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 17.0 | kN/m | ASTM D624 |
| Compression Set | ASTM D395 | ||
| 23°C, 24 hr | 17 | % | ASTM D395 |
| 50°C, 6 hr | 62 | % | ASTM D395 |
| Additional Information |
|---|
| Abrasion Resistance, DIN 53515, 10 N: 240 mm³Abrasion Resistance, DIN 53515, 5 N: 110 mm³Heat Stability, API Method, 24 hr, 70°C: 1.6% ShrinkageHeat Stability, API Method, 40 hr, 70°C: 0.3 % ShrinkageHardness, Asker C, 15 sec: 74Linear Expansion: 1.4 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Hopper Temperature | 90.0 - 100 | °C | |
| Processing (Melt) Temp | 90.0 - 105 | °C | |
| Mold Temperature | 175 - 185 | °C | |
| Injection Pressure | 8.00 - 10.0 | MPa | |
| Back Pressure | 0.00 - 2.00 | MPa | |
| Screw L/D Ratio | 18.0:1.0 to 20.0:1.0 |
| Injection instructions |
|---|
| Injection Rate: 6 to 15 g/secMold in aluminumCycle Time: 5 to 7 minFree nozzle (without valve)Injector: 90 to 100°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RJM SB301 | RJM International, Inc. | PBT | RJM |
| MORETEC™ 0168H | Prime Polymer Co., Ltd. | LLDPE | MORETEC™ |
| T-Blend® 6594B-WGS64 | TSRC Corporation | SEBS | T-Blend® |
| EverGlide® MB5550P-WC | Polymer Dynamix | XLPE | EverGlide® |
| ADVANCENE™ EE-1801-AAB | ETHYDCO | LLDPE | ADVANCENE™ |
