| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Montachem International, Inc. |
| Trademark: | Exelene® LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | z8T8Ir_Exelene-LDPE-6001.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
Applications:
Characteristics:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.921 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 6.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Strength 1 | ASTM D882 | ||
| -- 2 | 152 | MPa | |
| -- 3 | 138 | MPa |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 38 | µm | |
| Tensile Strength 4 | ASTM D882A | ||
| MD : Break | 20.7 | MPa | |
| TD : Break | 15.2 | MPa | |
| Tensile Elongation 5 | ASTM D882A | ||
| MD : Break | 250 | % | |
| TD : Break | 600 | % | |
| Dart Drop Impact 6(38000 µm) | 95 | g | ASTM D1709A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 110 | °C | DSC |
| Note Message | |
|---|---|
| 1 . | 5.1 mm/min |
| 2 . | TD, 1% secant |
| 3 . | MD, 1% secant |
| 4 . | 510 mm/min |
| 5 . | 510 mm/min |
| 6 . | F50, 66 cm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 803 Z DEL | RTP Company | Acetal (POM) Copolymer | RTP |
| Tecoform® PO20 NL RT | Eurotec Engineering Plastics | Acetal (POM) Copolymer | Tecoform® |
| Sindustris PP HG3101 | Sincerity Australia Pty Ltd. | PP, Unspecified | Sindustris PP |
| Adstif HA840R | LyondellBasell Industries | PP, High Crystal | Adstif |
| Geon™ Vinyl Wire & Cable WJCK512 | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Wire & Cable |