Order Products : sales@su-jiao.com
Acculam™ Epoxyglas Cowskin™
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Accurate Plastics, Inc. |
| Trademark: | Acculam™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | yfbiiO_Acculam-Epoxyglas-Cowskin-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Acculam® Epoxyglas Cowskin™ - Laminate sheet comprised of an epoxy resin binder, woven glass substrate and tough outer skins for improved surface wear resistance. This material has high mechanical strength in both dry and wet conditions. It is engineered as a carrier material in the polishing of hard disc drives and silicone chips. Its tough outer skins protect against exposing abrasive glass fibers and extend normal carrier life by more than five times. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.85 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr, 3.18 mm) | < 0.10 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 110 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Strength | ASTM D790 | ||
| 3.18 mm 1 | > 345 | MPa | ASTM D790 |
| 3.18 mm 2 | > 448 | MPa | ASTM D790 |
| Compressive Strength 3 | 415 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -- 4 | > 430 | J/m | ASTM D256 |
| -- 5 | > 530 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Temperature index | 140 | °C |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Bond Strength | > 1.0E+6 | g | |
| Standard Sheet Size (LxW): 36.00 x 48.00 inStandard Thickness Range: 0.025 to 0.250 in |
| Note Message | |
|---|---|
| 1 . | CW-A |
| 2 . | LW-A |
| 3 . | Flatwise |
| 4 . | CW |
| 5 . | LW |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sanren N110 (1st-grade) | SINOPEC Shanghai Petrochemical Co. Ltd. | LDPE | Sanren |
| Somos® NanoTool | DSM Somos® | Unspecified | Somos® |
| TRIREX® Compound 3500G30 | Samyang Corporation | PC | TRIREX® Compound |
| Crastin® LW9030 BK851 | DuPont Performance Polymers | PBT | Crastin® |
| CP PRYME® Nylon 66 NN300STHSL NAT | Chase Plastics Services Inc. | Nylon 66 | CP PRYME® Nylon 66 |
