Order Products : sales@su-jiao.com
Alpha PVC GM 8015-M NATURAL LCF
| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | AlphaGary |
| Trademark: | Alpha PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | yNdLYe_Alpha-PVC-GM-8015-M-NATURAL-LCF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A LEAD / CADMIUM FREE, 105C DEGREE, UL94 V-0 RATED, ELECTRICAL GRADE MOLDING COMPOUND. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.33 - 1.37 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A | 93 - 99 | ASTM D2240 | |
| Shaw A, 15 seconds | 87 - 93 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (1.91 mm) | 15.9 | MPa | ASTM D412 |
| Tensile Elongation (Break, 1.91 mm) | 300 | % | ASTM D412 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air 1(136°C, 168 hr) | -5.0 | % | UL Unspecified |
| Change in Ultimate Elongation in Air 2(136°C, 168 hr) | -20 | % | UL Unspecified |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -18.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (23°C) | 3.0E+14 | ohms·cm | ASTM D257 |
| Dielectric Constant (23°C, 100 MHz) | 2.80 | ASTM D150 | |
| Dissipation Factor (23°C, 100 MHz) | 0.016 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.50 mm | V-0 | UL 94 | |
| 3.00 mm | V-0 | UL 94 | |
| Oxygen Index (3.18 mm) | 31 | % | ASTM D2863 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 154 | °C | |
| Middle Temperature | 166 | °C | |
| Front Temperature | 171 | °C | |
| Nozzle Temperature | 177 | °C | |
| Processing (Melt) Temp | 171 - 185 | °C |
| Injection instructions |
|---|
| Zone 4: 350°FZone 5: 350°F |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 154 | °C | |
| Cylinder Zone 2 Temp. | 166 | °C | |
| Cylinder Zone 3 Temp. | 171 | °C | |
| Cylinder Zone 4 Temp. | 177 | °C | |
| Cylinder Zone 5 Temp. | 177 | °C | |
| Adapter Temperature | 177 | °C | |
| Melt Temperature | 171 - 185 | °C |
| Note Message | |
|---|---|
| 1 . | Thickness: 75 mil |
| 2 . | Thickness: 75 mil |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P3940C | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| Vyncolit® E 8833C | Vyncolit N.V. | Epoxy | Vyncolit® |
| Hapcoat™ 3721LV | Hapco Inc. | TP, Unspecified | Hapcoat™ |
| Iupilon® GSH2010KR | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
| Monprene® OM-12265-01 (PRELIMINARY DATA) | Teknor Apex Company | TPE | Monprene® |
