Order Products : sales@su-jiao.com
Telcar® GS7073A
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Teknor Apex Asia Pacific PTE. LTD. |
| Trademark: | Telcar® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xzGKAt_Telcar-GS7073A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Telcar®GS7073A is a thermoplastic elastomer (TPE) material,. This product is available in the Asia-Pacific region and is processed by extrusion or injection molding. Typical application areas include:
|
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.02 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 15 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 70 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 3.00 | MPa | ASTM D412 |
| 300% strain | 4.00 | MPa | ASTM D412 |
| Tensile Strength (Break) | 4.50 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 380 | % | ASTM D412 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 40.0 - 80.0 | °C | |
| Rear Temperature | 180 - 250 | °C | |
| Middle Temperature | 180 - 250 | °C | |
| Front Temperature | 180 - 250 | °C | |
| Mold Temperature | 40.0 - 60.0 | °C | |
| Injection Pressure | 10.3 - 138 | MPa | |
| Injection Rate | Fast |
| Injection instructions |
|---|
| Purging Material: HDPE, PP |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 40.0 - 80.0 | °C | |
| Cylinder Zone 1 Temp. | 170 - 230 | °C | |
| Cylinder Zone 2 Temp. | 170 - 230 | °C | |
| Cylinder Zone 3 Temp. | 170 - 230 | °C | |
| Cylinder Zone 4 Temp. | 170 - 230 | °C | |
| Cylinder Zone 5 Temp. | 170 - 230 | °C |
| Extrusion instructions |
|---|
| Compression Ratio: 2.5 to 5.0Purging Material: HDPE, PPLD Ratio: 25:1 or higher |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4105 | RTP Company | PEKK | RTP |
| SymTerra™ iLD1 | Premix, Inc. | TS, Unspecified | SymTerra™ |
| ELASTOSIL® LR 3040/60 A/B | Wacker Chemie AG | Silicone | ELASTOSIL® LR |
| LUVOCOM® 1301-0915 | Lehmann & Voss & Co. | PPS | LUVOCOM® |
| LUVOCOM® 1/CF/20/TF/15 | Lehmann & Voss & Co. | Nylon 66 | LUVOCOM® |
