Order Products : sales@su-jiao.com
STERalloy™ FDG 2503
| Category: | TP, Unspecified , Thermoplastic |
| Manufacturer: | Hapco Inc. |
| Trademark: | STERalloy™ FDG |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xVbCty_STERalloy-FDG-2503.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
STERalloy FDG is the first Liquid Molding Polymer Alloy Series that has been specifically designed for food and drug applications. All of the products in the STERalloy FDG Series exhibit unique physical and chemical properties are manufactured with FDA approved STERalloy FDG is the first Liquid Molding Polymer Alloy Series that has been specifically designed for food and drug applications. All of products in the STERalloy FDG Series exhibit unique physical and chemical properties and have been used in numerous applications where biocompatibility is required. Key Advantages:
The food, drug, pharmaceutical, wine, beer, juice, dairy, hospital equipment, and prosthetic industries are just some examples of applications that utilize special products such as STERalloy FDG. STERalloy FDG Elastomeric Series:
STERalloy FDG Rigid Series:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.13 | g/cm³ | ASTM D4669 |
| Molding Shrinkage - Flow | 0.050 to 0.20 | % | ASTM D2566 |
| Weight - per cubic inch | 19 | g |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gel Time 1(25°C) | 28.0 | min | ASTM D2971 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 65 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 96.5 | MPa | ASTM D638 |
| Tensile Strength | 13.8 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 120 | % | ASTM D638 |
| Flexural Modulus | 439 | MPa | ASTM D790 |
| Flexural Strength | 21.4 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | No Break | ASTM D256 | |
| Unnotched Izod Impact | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 54.0 | °C | |
| 1.8 MPa, Unannealed | 47.0 | °C |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 100, Mix Ratio by Volume: 100 | ||
| Part B | Mix Ratio by Weight: 24, Mix Ratio by Volume: 20 | ||
| Thermoset Mix Viscosity (25°C) | 35000 to 45000 | cP | ASTM D4878 |
| Demold Time (21°C) | 120 to 240 | min | Internal Method |
| Note Message | |
|---|---|
| 1 . | 100 g |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ShinkoLite-P IR G-504 | Mitsubishi Rayon America Inc. | Acrylic (PMMA) | ShinkoLite-P |
| YUNGSOX® PP 1040F | Formosa Polypropylene | PP Homopolymer | YUNGSOX® PP |
| NILAMID® A3 GF30 TM2 | Nilit Plastics | Nylon 66 | NILAMID® |
| KPOL-NYLON K-NY6/27D | KPOL Chem Co. | Nylon 6 | KPOL-NYLON |
| ICORENE® N1003 | ICO Polymers EMEA, A Division of A. Schulman | EVA | ICORENE® |
