Order Products : sales@su-jiao.com
TECHNYL® A 218 V40 BLACK 21 N
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Solvay Engineering Plastics |
| Trademark: | TECHNYL® A |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | xQy9KT_TECHNYL-A-218-V40-BLACK-21-N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polyamide PA66, reinforced with 40% of glass fibre, heat stabilised for injection moulding. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Part Marking Code (ISO 11469) |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.46 | -- | g/cm³ | ISO 1183/A |
| Water Absorption (23°C, 24 hr) | 0.70 | -- | % | ISO 62 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 13000 | 9900 | MPa | ISO 527-2/1A |
| Tensile Stress (Break) | 225 | 165 | MPa | ISO 527-2/1A |
| Tensile Strain (Break) | 2.0 | 3.0 | % | ISO 527-2/1A |
| Flexural Modulus | 10800 | 7800 | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | 15 | 19 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | 97 | 98 | kJ/m² | ISO 179/1eU |
| Notched Izod Impact Strength | 14 | 18 | kJ/m² | ISO 180/1A |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Melting Temperature | 263 | -- | °C | ISO 11357-3 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | 6.0E+14 | 1.0E+12 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | 1.0E+13 | ohms·cm | IEC 60093 |
| Electric Strength | 35 | 30 | kV/mm | IEC 60243-1 |
| Dissipation Factor | 0.010 | 0.11 | IEC 60250 | |
| Comparative Tracking Index (Solution A) | 450 | 450 | V | IEC 60112 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Oxygen Index | 23 | -- | % | ISO 4589-2 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Suggested Max Moisture | 0.20 | % | |
| Rear Temperature | 260 to 270 | °C | |
| Middle Temperature | 270 to 280 | °C | |
| Front Temperature | 280 to 290 | °C | |
| Mold Temperature | 60.0 to 80.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4702 | RTP Company | PTT | RTP |
| TEDUR® L 9222-1 | ALBIS PLASTIC GmbH | PPS | TEDUR® |
| Ad-Tech Polyester NO. 15-3 | Ad-Tech Plastic Systems Corp. | Polyester, TS | Ad-Tech Polyester |
| DILAMID® 6 SV 30 NATURAL OR BLACK | Dilaplast S.p.A. | Nylon 6 | DILAMID® |
| DOWLEX™ 2047G | The Dow Chemical Company | LLDPE | DOWLEX™ |
