Category: | PEI , Polyether Imide |
Manufacturer: | RTP Company |
Trademark: | RTP |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | w21GP9_RTP-2103-Z.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
General Information | |
---|---|
Filler / Reinforcement |
|
Agency Ratings |
|
RoHS Compliance |
|
Appearance |
|
Forms |
|
Processing Method |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Specific Gravity | 1.41 | g/cm³ | ASTM D792 |
Molding Shrinkage - Flow (3.18 mm) | 0.20 to 0.30 | % | ASTM D955 |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Modulus | 6890 | MPa | ASTM D638 |
Tensile Strength | 145 | MPa | ASTM D638 |
Tensile Elongation (Break) | 3.4 | % | ASTM D638 |
Flexural Modulus | 6890 | MPa | ASTM D790 |
Flexural Strength | 207 | MPa | ASTM D790 |
Impact | Nominal Value | Unit | Test Method |
---|---|---|---|
Notched Izod Impact (3.18 mm) | 53 | J/m | ASTM D256 |
Unnotched Izod Impact (3.18 mm) | 550 | J/m | ASTM D4812 |
Injection | Nominal Value | Unit | |
---|---|---|---|
Rear Temperature | 343 to 399 | °C | |
Middle Temperature | 343 to 399 | °C | |
Front Temperature | 343 to 399 | °C | |
Mold Temperature | 93.3 to 177 | °C | |
Injection Pressure | 103 to 138 | MPa |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
ABS Proquigel RF-70 | Proquigel | ABS | ABS Proquigel |
AEI SX408:CM401 | AEI Compounds Limited | LDPE | AEI |
Carbotex KV-75FD | Kotec Corporation | PC | Carbotex |
ENGAGE™ HM 7280 | The Dow Chemical Company | TPO (POE) | ENGAGE™ |
LUVOCOM® 1/GF/30/TF/15/BL | Lehmann & Voss & Co. | Nylon 66 | LUVOCOM® |