Order Products : sales@su-jiao.com
EPO-TEK® 730-110
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Epoxy Technology Inc. |
| Trademark: | EPO-TEK® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uZnRMu_EPO-TEK-730-110.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A two component, room temperature-curing, thermally and electrically insulating epoxy. It can be used for adhesive, sealing, potting or encapsulation applications found in semiconductor, electronics, optical and medical devices. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Glass Transition Temperature 1 | > 50.0 | °C | |
| CLTE - Flow | |||
| -- 2 | 6.1E-5 | cm/cm/°C | |
| -- 3 | 1.9E-4 | cm/cm/°C |
| Optical | Nominal Value | Unit | |
|---|---|---|---|
| Refractive Index 4 | 1.528 | ||
| Transmittance (480 to 1640 nm) | > 95.0 | % |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 1.0 | ||
| Part B | Mix Ratio by Weight: 1.0 | ||
| Shelf Life (23°C) | 52 | wk |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Degradation Temperature | 343 | °C | |
| Die Shear Strength - >10 kg (23°C) | 23.4 | MPa | |
| Operating Temperature | |||
| Continuous | -55 to 150 | °C | |
| Intermittent | -55 to 250 | °C | |
| Storage Modulus | 896 | MPa | |
| Weight Loss on Heating (200°C) | 1.0 | % |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Color | |||
| -- 5 | Clear/Transparent | ||
| -- 6 | Yellow | ||
| Density | |||
| Part B | 0.968 | g/cm³ | |
| Part A | 1.17 | g/cm³ | |
| Viscosity 7(23°C) | 8.0 to 12 | Pa·s | |
| Curing Time (80°C) | 2.0 | hr | |
| Pot Life | 60 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (Shore D) | 76 | ||
| Lap Shear Strength (23°C) | > 13.8 | MPa | |
| Relative Permittivity (1 kHz) | 3.10 | ||
| Volume Resistivity (23°C) | > 4.0E+12 | ohms·cm | |
| Dissipation Factor (1 kHz) | 8.0E-3 |
| Note Message | |
|---|---|
| 1 . | Dynamic Cure 20-200°C/ISO 25 Min; Ramp -10-200°C @ 20°C/Min |
| 2 . | Below Tg |
| 3 . | Above Tg |
| 4 . | 589 nm |
| 5 . | Part A |
| 6 . | Part B |
| 7 . | 20 rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® F02-139A | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| VITAMIDE® AF10 | A. Schulman Europe | Nylon 66 | VITAMIDE® |
| ULTZEX™ 3550R | Prime Polymer Co., Ltd. | LLDPE | ULTZEX™ |
| Baytec® ME-230 (97A/55D) | Covestro - PUR | PUR-Ether/MDI | Baytec® |
| DENILUB Y 30G 0Mo | Vamp Tech | Nylon 66 | DENILUB |
