Order Products : sales@su-jiao.com
Lanufene LLI 2420
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Ras Lanuf Oil & Gas Processing Company (RASCO) |
| Trademark: | Lanufene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cbOL5k_Lanufene-LLI-2420.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LANUFENE LLI 2420 is a linear low density polyethylene for injection molding with high mechanical properties and good process-ability. The narrow molecular weight distribution and good melt flow make it ideally suited for injection molding applications where good toughness, low warpage, outstanding low temperature performance and good environmental stress cracking resistance (ESCR) are demanded. LANUFENE LLI 2420 is suitable for injection molding applications such as housewares, lids, trash cans, industrial containers, automotive parts and toys. LANUFENE LLI 2420 is also designed for good base resin of various PE master batches. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.924 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/21.6 kg) | 20 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.0 to 3.0 | % | Internal Method |
| Environmental Stress-Cracking Resistance 1(50°C, 100% Igepal, F50) | 150 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - 1% Secant | 314 | MPa | ASTM D638 |
| Tensile Strength (Ultimate) | 11.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 450 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 500 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -70.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 94.0 | °C | ASTM D1525 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°, 38.0 µm) | 55 | ASTM D2457 | |
| Haze (38.0 µm) | 12 | % | ASTM D1003 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 180 to 270 | °C |
| Note Message | |
|---|---|
| 1 . | Non-Slitted |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PVC Film 170 NT | Teknor Apex Company | PVC, Flexible | PVC Film |
| Wellamid® GF33-66/6 XE-BK167A | Wellman Engineering Resins | Nylon 66/6 | Wellamid® |
| ATTANE™ 4606G | The Dow Chemical Company | ULDPE | ATTANE™ |
| EMOPLEN® HP GFR 35 | EMAS Plastik San.Tic.AS. | PP Homopolymer | EMOPLEN® |
| Sylvin 6920X08 Green 3219 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
