Order Products : sales@su-jiao.com

Eltex® HD5130EA-B

Category:	HDPE , High Density Polyethylene
Manufacturer:	INEOS Olefins & Polymers Europe
Trademark:	Eltex®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	tsClcT_Eltex-HD5130EA-B.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Eltex® HD5130EA-B is a high-density polyethylene copolymer grade with a narrow molecular weight distribution, specially developed for injection and compression moulding application requiring very high environmental stress cracking resistance. Thanks to high purity and excellent organoleptic properties, this grade is particularly intended for the packaging in direct contact with beverages
Typical applications

Caps & closures for the packaging of sparkling water and carbonated soft drinks

Caps & closures for the packaging of medical and pharmaceutical applications

Benefits and Features

Very good environmental stress cracking resistance

Very high impact strength

Low warpage

Slip agent free grade

Excellent, quality controlled organoleptic properties. In order to preserve the excellent organoleptic properties, it is important not to exceed a melt temperature of 250°C during processing.

General Information
Features	Ultra-high impact resistance High purity Low warpage High ESCR (Stress Cracking Resistance) Copolymer Good sensory characteristics Narrow molecular weight distribution
Uses	Shield Shell
RoHS Compliance	Contact manufacturer
Forms	Particle
Processing Method	Compression molding Injection molding

Physical	Nominal Value	Unit	Test Method
Density	0.952	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	2.4	g/10 min	ISO 1133
Environmental Stress-Cracking Resistance	20.0	hr	ASTM D1693

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	1200	MPa	ISO 527-2/1B
Tensile Stress (Yield)	27.0	MPa	ISO 527-2/1B

Impact	Nominal Value	Unit	Test Method
Charpy Unnotched Impact Strength (23°C)	8.0	kJ/m²	ISO 179

Additional Information
The value listed as Density ASTM D1183, was tested in accordance with ASTM D1872.The value listed as Eniro. Stress Crack Res. ASTM D1693, was tested in accordance with INEOS test methods.Organoleptic Properties, INEOS methods: OK

Resin Grade	Manufacturer	Category	Trademark
Trademark PP PPC2040M	Trademark Plastics Corporation	PP Impact Copolymer	Trademark PP
TOTAL Polypropylene PPC 5947WZ	TOTAL Refining & Chemicals	PP Impact Copolymer	TOTAL Polypropylene
WELLAMID Nylon 6600/42 HWCP	CP-Polymer-Technik GmbH & Co. KG	Nylon 66	WELLAMID Nylon
AMTOPP EM18	Inteplast Group	PP, Unspecified	AMTOPP
KOPA® KN3321G10V0L	Kolon Plastics, Inc.	Nylon 66	KOPA®