Order Products : sales@su-jiao.com
Pro-fax EP315J
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Pro-fax |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | snmGe7_Pro-fax-EP315J.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Pro-fax EP315J low melt flow, electrical grade polypropylene copolymer resin has outstanding toughness, flex-life and abrasion resistance. This resin demonstrates good processing behavior and is tailored for trouble-free production of primary cable insulation, especially filled telephone cable because its unique stabilizer system resists extraction by petroleum-jelly base filling compounds. Because of its ease of processing and resultant low operating pressures, Pro-fax EP315J resin keeps wire draw to a minimum and consequently has been the preferred resin for 24 and 26 AWG wire. Typical applications include telephone singles and general primary insulation. For regulatory compliance information see Pro-fax EP315J Product Stewardship Bulletin (PSB). |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792B |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 2.6 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 22.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 7.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 2 | 1040 | MPa | ASTM D790A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -30.0 | °C | ASTM D746 |
| Oxidation Induction Time (200°C) | > 20 | min | ASTM D3895 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | > 1.0E+15 | ohms·cm | ASTM D257 |
| Dielectric Constant | ASTM D150 | ||
| 100 kHz | 2.25 | ||
| 1 MHz | 2.25 | ||
| Dissipation Factor | ASTM D150 | ||
| 100 kHz | 3.0E-4 | ||
| 1 MHz | 3.0E-4 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Regis® 6500 | Noble Polymers | Polyolefin, Unspecified | Regis® |
| Sylvin 2920-85 Clear | Sylvin Technologies Incorporated | PVC, Flexible | Sylvin |
| TEREZ PA 6 7500 GF 30 FL HF/1 | TER HELL PLASTIC GMBH | Nylon 6 | TEREZ PA 6 |
| EMLON® 66 GFR 30 FR V0 | EMAS Plastik San.Tic.AS. | Nylon 66 | EMLON® |
| Plaslube® PA6 HS L MB | Techmer Engineered Solutions | Nylon 6 | Plaslube® |
