Order Products : sales@su-jiao.com
Zhongfa PP pp7
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Yuyao Zhongfa Engineering Plastics Co. Ltd. |
| Trademark: | Zhongfa |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LKgexG_Zhongfa-PP-pp7.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Zhongfa PP pp7 is a polypropylene material and contains 30% mineral fillers. This product is available in the Asia-Pacific region and is processed by injection molding. The main features of Zhongfa PP pp7 are:
Typical application areas include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 4.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.80 - 1.0 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 100 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 50.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 5.0 | % | ASTM D638 |
| Flexural Modulus | 2400 | MPa | ASTM D790 |
| Flexural Strength | 40.0 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 155 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 135 | °C | ASTM D648 |
| Additional Information |
|---|
| Aging Resistance at 150°C: 750 hrNotched Izod Impact, ASTM D256: 4 kJ/m²Unnotched Izod Impact, ASTM D256: 18 kJ/m² |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 - 95.0 | °C | |
| Drying Time | 2.0 - 3.0 | hr | |
| Processing (Melt) Temp | 195 - 225 | °C | |
| Mold Temperature | 45.0 - 80.0 | °C | |
| Injection Pressure | 60.0 - 90.0 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PROTEQ™ C24UST2 | Marplex Australia Pty. Ltd. | PP Copolymer | PROTEQ™ |
| NuSil CV4-2289-1 | NuSil Technology | Silicone | NuSil |
| Braskem PE HS5010 | Braskem | HDPE | Braskem PE |
| ETILINAS HD5739UB | POLYETHYLENE MALAYSIA SDN BHD | HDPE | ETILINAS |
| LEXAN™ ML3290 resin | SABIC Innovative Plastics Europe | PC | LEXAN™ |
