Order Products : sales@su-jiao.com
Andur 7 DPLM/Curene® 442
| Category: | PUR-Ester/TDI , Polyurethane (Polyester, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | sa6LN6_Andur-7-DPLM-Curene-442.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 7-DP-LM is a polyester based liquid, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 70 to 72 Shore D is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis(orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442 and other diamines, or through the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.25 | g/cm³ | ASTM D1505 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 71 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 22.1 | MPa | ASTM D412 |
| 300% strain | 57.9 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 57.9 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 300 | % | ASTM D412 |
| Compression Set | 36 | % | ASTM D395B |
| Bayshore Resilience | 52 | % | ASTM D2632 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life | 2.0 - 3.0 | min | |
| Demold Time (100°C) | 20 | min | |
| Post Cure Time (100°C) | 16 | hr |
| Additional Information |
|---|
| Durometer Hardness, ASTM D2240, Shore D: 68 to 73Die C Tear, ASTM D1004: 980 pliAverage Split Tear, ASTM D1938: 476 pliStoichiometry Curative Level: 95%Mix Temperature: Andur 7 DPLM: 180-212°F Curene 442: 230-240°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RAMTAL PM1409 | Polyram Ram-On Industries | Acetal (POM) Copolymer | RAMTAL |
| Silopren® Gel TP3607 | Momentive Performance Materials Inc. | Silicone Rubber, RTV-2 | Silopren® |
| Spartech Polycom SCR7-7010R | Spartech Polycom | PC | Spartech |
| Aquamix™ 568 | PolyOne Corporation | Latex | Aquamix™ |
| ISPLEN® PB 171 H1M | REPSOL | PP Impact Copolymer | ISPLEN® |
