Order Products : sales@su-jiao.com
Tuftec™ H1041
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | AKelastomers |
| Trademark: | Tuftec™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | 2ovGsU_Tuftec-H1041.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Relatively low molecular weight and thus high processability and flowability, along with superior balance of mechanical strength as elastomer and elongation. Olefinic and styrenic resins modifier, for high impact strength. Compatibilizer. Adhesives and sealants component. Base polymer of SEBS molding compounds. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.910 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 5.0 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 84 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 3.40 | MPa | ISO 37 |
| Tensile Stress 1(Break) | 21.6 | MPa | ISO 37 |
| Tensile Elongation 2(Break) | 650 | % | ISO 37 |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| Styrene/Rubber ratio | 30/70 | Internal Method |
| Note Message | |
|---|---|
| 1 . | Type 1A, 500 mm/min |
| 2 . | Type 1A, 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ICORENE® 3935 | ICO Polymers SA, A Division of A. Schulman | PE Copolymer | ICORENE® |
| Jam PE 10Y02 | Jam Petrochemical Company | LLDPE | Jam PE |
| Lucofin® 1461 | Lucobit AG | Polyolefin, Unspecified | Lucofin® |
| LNP™ STAT-KON™ DD000 compound | SABIC Innovative Plastics | PC | LNP™ STAT-KON™ |
| Durethan® AKV 30 HR H2.0 900116 | LANXESS GmbH | Nylon 66 | Durethan® |
