Order Products : sales@su-jiao.com
3M™ Dyneon™ PTFE Compound TF 6406
| Category: | PTFE , Polytetrafluoroethylene |
| Manufacturer: | 3M Advanced Materials Division |
| Trademark: | 3M™ Dyneon™ PTFE Compound |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | sNW36F_3M-Dyneon-PTFE-Compound-TF-6406.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Features
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 3.73 | g/cm³ | ASTM D4745-06 |
| Apparent Density | 1.37 | g/cm³ | ASTM D4894-07 |
| Molding Shrinkage - Flow | 1.7 | % | ASTM D4894-07 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness 1(Shore D) | 72 | DIN 53505 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Break) | 16.0 | MPa | ASTM D4745-06 |
| Tensile Elongation 3(Break) | 240 | % | ASTM D4745-06 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Compression Molding Molding Pressure | 55.0 | MPa | |
| Compression Molding Temperature | 23 to 26 | °C | |
| Sintering Temperature | < 365 | °C |
| Note Message | |
|---|---|
| 1 . | Measured on sintered moldings |
| 2 . | Measured on sintered moldings |
| 3 . | Measured on sintered moldings |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TRIBOCOMP® PA612 GF30 TS0 | EPIC Polymers | Nylon 612 | TRIBOCOMP® |
| YUPLENE® B391M | SK Global Chemical | PP Impact Copolymer | YUPLENE® |
| Geon™ Vinyl Flexible A75G0 | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
| KOPLA PC KCG1030 | KOPLA Co., Ltd. | PC | KOPLA PC |
| PELPRENE™ S6001 | TOYOBO America, Inc. | TPEE | PELPRENE™ |
