Order Products : sales@su-jiao.com
Generic Polyester, TP - Glass Fiber
| Category: | Polyester, TP , Thermoplastic Polyester |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cgfeTg_Generic-Polyester-TP---Glass-Fiber.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic Polyester, TP - Glass Fiber This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.78 to 1.90 | g/cm³ | ASTM D792 |
| Bulk Factor | 1.0 to 3.0 | ASTM D1895 | |
| Molding Shrinkage - Flow (23°C) | 0.025 to 0.18 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.099 to 0.17 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Barcol Hardness | 40 to 50 | ASTM D2583 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (23°C) | 31.0 to 39.2 | MPa | ASTM D638 |
| Flexural Modulus (23°C) | 4550 to 12800 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 65.5 to 143 | MPa | ASTM D790 |
| Compressive Modulus | 324000 to 407000 | MPa | ASTM D695 |
| Compressive Strength (23°C) | 102 to 153 | MPa | ASTM D695 |
| Shear Strength (23°C) | 31.0 to 59.0 | MPa | ASTM D732 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 43 to 590 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 258 to 260 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength (23°C) | 13 to 14 | kV/mm | ASTM D149 |
| Arc Resistance | 184 to 188 | sec | ASTM D495 |
| Inclined-Plane Tracking | 988 to 1000 | min | ASTM D2303 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYLAN ANC100 | POLYMA Kunststoff GmbH & Co. KG | ABS | POLYLAN |
| DURANEX® 7407 | Polyplastics Co., Ltd. | PC+PBT | DURANEX® |
| LONGLITE® PBT 4130F-203B | CCP Group | PBT | LONGLITE® PBT |
| PEXLOY™ PXP-413UV-NATURAL | Pier One Polymers, Inc. | PC+Polyester | PEXLOY™ |
| SCHULAMID® 66 GF 30 FC | A. Schulman Europe | Nylon 66 | SCHULAMID® |
