Order Products : sales@su-jiao.com
INSTRUC TPUGF30 70D
| Category: | TPU, Unspecified , Thermoplastic Polyurethane Elastomer |
| Manufacturer: | Infinity LTL Engineered Compounds |
| Trademark: | INSTRUC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | rYGedK_INSTRUC-TPUGF30-70D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 30% FIBERGLASS REINFORCED TPU |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.50 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 0.20 to 0.40 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 70 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 70.3 | MPa | ASTM D638 |
| Flexural Modulus | 3310 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 160 | J/m | ASTM D256 |
| Unnotched Izod Impact | 1100 to 1200 | J/m | ASTM D256 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | > 1.0E+17 | ohms | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 93.3 | °C | |
| Drying Time | 4.0 | hr | |
| Rear Temperature | 188 to 213 | °C | |
| Middle Temperature | 188 to 213 | °C | |
| Front Temperature | 188 to 213 | °C | |
| Processing (Melt) Temp | 210 | °C | |
| Mold Temperature | 15.6 to 37.8 | °C | |
| Back Pressure | 0.345 to 0.689 | MPa | |
| Screw Speed | 40 to 70 | rpm | |
| Vent Depth | 0.025 to 0.051 | mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ALAMID® 6.6 MF 40 | LEIS Polytechnik - polymere Werkstoffe GmbH | Nylon 66 | ALAMID® |
| DOMAMID® 66M40 | DOMO Engineering Plastics SPA | Nylon 66 | DOMAMID® |
| Grilon® BZ 3 | EMS-GRIVORY | Nylon 6 | Grilon® |
| ICORENE® 2010 | ICO Polymers APAC, A Division of A. Schulman | LDPE | ICORENE® |
| Dryflex® 500001 | ELASTO | SEBS | Dryflex® |
