Order Products : sales@su-jiao.com
RTP 2700-60A
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qQgYy2_RTP-2700-60A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. -Preliminary Product Data per RTP Co.- |
| General Information | |
|---|---|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.948 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 0.70 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 60 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 68.9 | MPa | ASTM D638 |
| Tensile Strength | 3.79 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 10 | % | ASTM D638 |
| Flexural Modulus | 68.9 | MPa | ASTM D790 |
| Flexural Strength | 0.689 | MPa | ASTM D790 |
| Additional Information |
|---|
| Tensile Elongation, ASTM D-638: 10+% |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 79.4 | °C | |
| Drying Time | 2.0 | hr | |
| Suggested Max Moisture | 0.030 | % | |
| Suggested Max Regrind | 20 | % | |
| Rear Temperature | 163 - 232 | °C | |
| Middle Temperature | 163 - 232 | °C | |
| Front Temperature | 163 - 232 | °C | |
| Mold Temperature | 15.6 - 65.6 | °C | |
| Injection Pressure | 68.9 - 103 | MPa | |
| Back Pressure | 0.345 | MPa | |
| Clamp Tonnage | 4.1 - 8.3 | kN/cm² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Synprene™ RT-5155 RoHS Natural | PolyOne Corporation | SBC | Synprene™ |
| DOMAMID® 6 PZ 40B2 | DOMO Engineering Plastics SPA | Nylon 6 | DOMAMID® |
| Flontech® FT-COND-1 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| MAJORIS GB700 - 1199 | AD majoris | PP, Unspecified | MAJORIS |
| Plaslube® J-4/30/TF/13/SI/2 NAT | Techmer Engineered Solutions | Nylon 612 | Plaslube® |
