Order Products : sales@su-jiao.com
Generic PEI - Proprietary
| Category: | PEI , Polyether Imide |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qEr84F_Generic-PEI---Proprietary.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PEI - Proprietary This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.27 - 1.60 | g/cm³ | ASTM D792 |
| Molding Shrinkage | ASTM D955 | ||
| Flow : 23°C | 0.20 - 0.70 | % | ASTM D955 |
| Transverse flow : 23°C | 0.39 - 0.80 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | |||
| 23°C | 2760 - 3700 | MPa | ASTM D638 |
| 23°C | 3190 - 3680 | MPa | ISO 527-2 |
| Tensile Strength | |||
| Fracture, 23°C | 88.9 - 216 | MPa | ASTM D638 |
| Fracture, 23°C | 60.0 - 205 | MPa | ISO 527-2 |
| Tensile Elongation | |||
| Fracture, 23°C | 1.1 - 3.7 | % | ASTM D638 |
| Fracture, 23°C | 0.70 - 11 | % | ISO 527-2 |
| Flexural Modulus | |||
| 23°C | 2760 - 17600 | MPa | ASTM D790 |
| 23°C | 3120 - 17100 | MPa | ISO 178 |
| Flexural Stress (23°C) | 72.0 - 284 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| 23°C | 37 - 54 | J/m | ASTM D256 |
| 23°C | 2.1 - 8.9 | kJ/m² | ISO 180 |
| Unnotched Izod Impact | |||
| 23°C | 340 - 1400 | J/m | ASTM D256 |
| 23°C | 18 - 90 | kJ/m² | ISO 180 |
| Instrumented Dart Impact (23°C) | 2.80 - 12.0 | J | ASTM D3763 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 1.8 MPa, not annealed | 163 - 214 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 160 - 214 | °C | ISO 75-2/A |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Time | 5.0 | hr |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PEI - ProprietaryThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ACCUTECH™ ABS832G30L | ACLO Compounders Inc. | ABS | ACCUTECH™ |
| Aaroprene® ATPO 3000 90A | Aaron Industries Corp. | TPO (POE) | Aaroprene® |
| ColorRx® PC-1000RX | LTL Color Compounders, Inc. | PC | ColorRx® |
| EMOPLEN® A 1310 T2 | EMAS Plastik San.Tic.AS. | PP, Unspecified | EMOPLEN® |
| Sylvin 8356-73 Brown 7437 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
