Order Products : sales@su-jiao.com
SABIC® PPcompound 8650U
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Saudi Basic Industries Corporation (SABIC) |
| Trademark: | SABIC® PPcompound |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pSitnf_SABICPPcompound8650U.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SABIC® PPcompound 8650U a development grade, elastomer-modified mineral filled Polypropylene for automotive exterior applications. This material combines excellent stiffness and high impact with low density. The combination makes the material very suitable for thin wall bumper applications. This grade is UV stabilized and can be used for unpainted applications. This grade will also be available in an open concept (8650 MB1 & 8650 MB2) and for painted applications (8650). SABIC® PPcompound 8650U is a designated automotive grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.970 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 25 | g/10 min | ISO 1133 |
| Molding Shrinkage (24 hours, 3.20mm) | 0.70 - 0.80 | % | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 1500 | MPa | ISO 527-2/1B |
| Tensile Stress | ISO 527-2/1A | ||
| Yield, injection molding | 18.0 | MPa | ISO 527-2/1A |
| Fracture, injection molding | 15.0 | MPa | ISO 527-2/1A |
| Tensile Strain (Break, Injection Molded) | 60 | % | ISO 527-2/1A |
| Flexural Modulus (Injection Molded) | 1550 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ISO 180/4A | ||
| -20°C, injection molding | 8.0 | kJ/m² | ISO 180/4A |
| 0°C, injection molding | 15 | kJ/m² | ISO 180/4A |
| 23°C, injection molding | No Break | ISO 180/4A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE - Flow (-30 to 100°C) | 7.0E-5 | cm/cm/°C | ASTM D696 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 6177-80 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| ALCOM® PC 740/4 UV WT1310-05LD | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
| Daelim Po1y® LL-05SC | DAELIM INDUSTRIAL CO., LTD. | LLDPE | Daelim Po1y® |
| FLEXITEQ™ F50D000 | Marplex Australia Pty. Ltd. | TPV | FLEXITEQ™ |
| DuraGrip® DGR 6170NC | Advanced Polymer Alloys | TPE | DuraGrip® |
