Order Products : sales@su-jiao.com
Shin-Etsu Elastomer KE-2090-30A/B
| Category: | Silicone Rubber, HTV , Silicone Rubber, HTV |
| Manufacturer: | Shin-Etsu Silicones of America |
| Trademark: | Shin-Etsu Elastomer |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | dHzwyo_Shin-Etsu-Elastomer-KE-2090-30A-B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Shin-Etsu KE-2090-30 is a selective self-adhesive liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KE-2090-30 is low enough to allow easy pumping through most injection molding systems.
|
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.11 | g/cm³ |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness | 30 |
| Elastomers | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | 8.50 | MPa | |
| Tensile Elongation (Break) | 840 | % | |
| Tear Strength 1 | 25.0 | kN/m | |
| Compression Set (180°C, 22 hr) | 7.0 | % |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Shelf Life (32°C) | 26 | wk |
| Additional Information |
|---|
| Press / Post Cure: Press |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Curing Time | 0.17 | hr |
| Note Message | |
|---|---|
| 1 . | B mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Styrolution PS 1621 | INEOS Styrolution Group GmbH | PS (GPPS) | Styrolution PS |
| Sup-tech B101 | Shanghai Suptech Engineering Plastics Co. Ltd. | Nylon 6 | Sup-tech |
| TYLON® 2413 | Tyne Plastics LLC. | Nylon 6 | TYLON® |
| TRILOY® CF210M | Samyang Corporation | PC+ABS | TRILOY® |
| Durez® 11078 | SBHPP | Phenolic | Durez® |
