Order Products : sales@su-jiao.com
Thermoset Plastics 104
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Thermoset, Lord Chemical Products |
| Trademark: | Thermoset Plastics |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | p83FtH_Thermoset-Plastics-104.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Thermoset Plastics 104 is an Epoxy; Epoxide (Epoxy) material. It is available in North America. Important attributes of Thermoset Plastics 104 are:
Typical application of Thermoset Plastics 104: Adhesives/Tapes |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Density | 1.05 | g/cm³ | ASTM D1895 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 75 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 35.9 | MPa | ASTM D638 |
| Flexural Strength (Yield) | 43.4 | MPa | ASTM D790 |
| Compressive Strength | 63.4 | MPa | ASTM D695 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Volume: 1.0 Mix Ratio by Weight: 4.0 | ||
| Resin | Mix Ratio by Weight: 5.0 Mix Ratio by Volume: 1.0 | ||
| Thermoset Mix Viscosity (25°C) | 850 | cP | ASTM D2393 |
| Demold Time (25°C) | 240 to 360 | min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ReinForce™ 5935LE | PolyOne Corporation | PP Homopolymer | ReinForce™ |
| Tekulon PC 24 | TEKUMA Kunststoff GmbH | PC | Tekulon |
| VICTREX® PEEK 150PF | Victrex plc | PEEK | VICTREX® PEEK |
| Nylene® 5233 HS | Custom Resins Group | Nylon 6 | Nylene® |
| OmniTech™ PBT 357 | OMNI Plastics, LLC | PBT | OmniTech™ |
