Order Products : sales@su-jiao.com

OKITEN® 233 A

Category:	LDPE , Low Density Polyethylene
Manufacturer:	DIOKI d.d.
Trademark:	OKITEN®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	obHaA3_OKITEN-233-A.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message
OKITEN® 233 A is low density polyethylene, without slip agent, intended for extrusion of general purpose blown film. OKITEN® 233 A is characterized by excellent processing properties and thermal stability. Extruded film has good mechanical properties.

General Information
Additive	Heat Stabilizer
Features	Food Contact Acceptable Good Processability Good Stiffness Good Thermal Stability Heat Stabilized Opticals
Uses	Blending Film Shrink Wrap
Agency Ratings	EC 1907/2006 (REACH) EU 2002/72/EC EU 2004/19/EC EU 94/62/EC
Forms	Pellets
Processing Method	Blown Film Coextrusion Film Extrusion

Physical	Nominal Value	Unit	Test Method
Density	0.923	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	0.60	g/10 min	ISO 1133

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)	46		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress			ISO 527-2
Yield	10.0	MPa
Break	15.0	MPa
Tensile Strain (Break)	770	%	ISO 527-2
Coefficient of Friction			ISO 8295
vs. Itself - Dynamic	> 0.40
vs. Itself - Static	> 0.40

Films	Nominal Value	Unit	Test Method
Film Thickness - Tested	50	µm
Film Thickness - Recommended / Available	0.040 mm to 0.100 mm

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	96.0	°C	ISO 306/A

Extrusion	Nominal Value	Unit
Melt Temperature	145 to 180	°C

Resin Grade	Manufacturer	Category	Trademark
MarFlex® 7114	Chevron Phillips Chemical Company LLC	LLDPE	MarFlex®
CelloTherm™ T335	Innovia Films Ltd.	CA	CelloTherm™
Fluoroplex X 50 - GML	UNIFLON	PTFE	Fluoroplex
Elastocon® SMR1000	Elastocon TPE Technologies	TPO (POE)	Elastocon®
Idemitsu PS NS-321	Idemitsu PS	PS (HIPS)	Idemitsu PS