Order Products : sales@su-jiao.com
POLIGOM G/35
| Category: | EPDM , Ethylene Propylene Diene Terpolymer |
| Manufacturer: | Crosspolimeri S.p.A. |
| Trademark: | POLIGOM |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | q6g1IL_POLIGOM-G-35.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
POLIGOM is the trade-mark of our compound EPDM basis. POLIGOM G/35 is a thermoplastic elastomer compound for power cables insulation and sheathing. |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.910 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 72 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | > 12.0 | MPa | IEC 60811 |
| Tensile Strain (Break) | > 500 | % | IEC 60811 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (135°C, 168 hr) | > 12 | % | IEC 60811 |
| Change in Tensile Strain at Break in Air (135°C, 168 hr) | > 450 | % | IEC 60811 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -50.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | > 1.0E+15 | ohms·cm | IEC 60093 |
| Electric Strength | 0.60 | kV/mm | IEC 60243-1 |
| Test Voltage | 6500 | V | IEC 60502 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 150 | °C | |
| Cylinder Zone 2 Temp. | 160 | °C | |
| Cylinder Zone 3 Temp. | 170 | °C | |
| Cylinder Zone 4 Temp. | 180 | °C | |
| Cylinder Zone 5 Temp. | 190 | °C | |
| Die Temperature | 215 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 5175-92 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Exceed™ 3518 Series | ExxonMobil Chemical | mPE | Exceed™ |
| Ferro PP TPP20AF60GY | Ferro Corporation | PP Homopolymer | Ferro PP |
| MAXAMID™ PA6G15HSL-BK | Pier One Polymers, Inc. | Nylon 6 | MAXAMID™ |
| ULTEM™ AUT200 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
