Rotec® ASA T 115

Category:	ASA , Acrylonitrile Styrene Acrylate
Manufacturer:	ROMIRA GmbH
Trademark:	Rotec® ASA
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	oQzuff_Rotec-ASA-T-115.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Rotec®ASA T 115 is an acrylonitrile-styrene-acrylate (ASA) material,. This product is available in Europe,. Rotec®The main characteristics of ASA T 115 are: flame retardant/rated flame.

General Information
UL File Number	148878
Forms	Particle

Physical	Nominal Value	Unit	Test Method
Density	1.06	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg)	18	g/10 min	ISO 1133
Molding Shrinkage	0.30 - 0.50	%	ISO 294-4
Water Absorption (23°C, 24 hr)	0.36	%	ISO 62

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (23°C)	14	kJ/m²	ISO 179/1eA
Charpy Unnotched Impact Strength (23°C)	No Break		ISO 179/1eU

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	110	°C	ISO 306/B50

Flammability	Nominal Value		Test Method
Flame Rating	HB		UL 94

Additional Information
Most tests were performed under DIN test standards.Density, DIN 53479, 23°C, 50% RH: 1.06 g/mlMold Shrinkage, DIN 16901, 23°C: .3 to .5 %Charpy Notched Bar Impact Strength, ISO 179, 23°C, Type 1, Edgewise, Notch A, 80x10x4, Natural: 14 kJ/m²Charpy Notched Bar Impact Strength, ISO 179, 23°C, Type 1, Edgewise, Notch A, 80x10x4, Color: 14 kJ/m²Charpy Unnotched Impact Strength, ISO 179, 23°C, Type 1, Edgewise, 80x10x4, Color/Natural: 70 No Break kJ/m²

Additional Information

Most tests were performed under DIN test standards.Density, DIN 53479, 23°C, 50% RH: 1.06 g/mlMold Shrinkage, DIN 16901, 23°C: .3 to .5 %Charpy Notched Bar Impact Strength, ISO 179, 23°C, Type 1, Edgewise, Notch A, 80x10x4, Natural: 14 kJ/m²Charpy Notched Bar Impact Strength, ISO 179, 23°C, Type 1, Edgewise, Notch A, 80x10x4, Color: 14 kJ/m²Charpy Unnotched Impact Strength, ISO 179, 23°C, Type 1, Edgewise, 80x10x4, Color/Natural: 70 No Break kJ/m²

Resin Grade	Manufacturer	Category	Trademark
ULTEM™ 2110 resin	SABIC Innovative Plastics	PEI	ULTEM™
FERREX® GPP20CF NA	Ferro Corporation	PP, Unspecified	FERREX®
Grivory® XE 4102 black 9238	EMS-GRIVORY	Nylon 10T/X	Grivory®
EPIGUM DPE/73	Crosspolimeri S.p.A.	TPV	EPIGUM
Kepital® TE-24	Korea Engineering Plastics Co., Ltd	Acetal (POM) Copolymer	Kepital®