Order Products : sales@su-jiao.com
RTP 1200 S-60D
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | oFZQkn_RTP-1200-S-60D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| RTP 1200 S-60D is a thermoplastic polyurethane elastomer (polyester)(TPU-polyester) material,. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The processing method is injection molding. |
| General Information | |
|---|---|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.23 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 1.0 | % | ASTM D955 |
| Moisture Content | 0.020 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 62 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 20.1 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 31.7 | MPa | ASTM D412 |
| Tensile Elongation (Yield) | 490 | % | ASTM D412 |
| Tear Strength 1 | 189 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 107 | °C | |
| Drying Time | 6.0 | hr | |
| Dew Point | -28.9 | °C | |
| Processing (Melt) Temp | 210 - 227 | °C | |
| Mold Temperature | 26.7 - 60.0 | °C | |
| Injection Pressure | 41.4 - 103 | MPa |
| Injection instructions |
|---|
| Desiccant Type Dryer Required. |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mirakutoran® TPU E585PKOO | Japan Mirakutoran Inc. | TPU Alloy | Mirakutoran® TPU |
| Niretan B SV10 | Soredi S.p.a. | Nylon 6 | Niretan B |
| CYCOLOY™ C2950 resin | SABIC Innovative Plastics | PC+ABS | CYCOLOY™ |
| Jampilen HP500L | Jam Polypropylene Company | PP Homopolymer | Jampilen |
| EPAMOULD 295A83W | Epaflex Polyurethanes S.R.L. | TPU-Polyester | EPAMOULD |
