Order Products : sales@su-jiao.com
TECAFORM® AH ID
| Category: | Acetal (POM) Copolymer , Acetal (POM) Copolymer |
| Manufacturer: | Ensinger Inc. |
| Trademark: | TECAFORM® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | oC0xlB_TECAFORM-AH-ID.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Until now, when a food processor or other manufacturer needed a means of detecting the presence of foreign substances in the product, they had no choice but to use highly visible colored materials for their plastic parts. TECAFORM AH ID is the first commercially available thermoplastic that can be detected by the standard metal detection equipment that is typically used in quality inspection. This advancement in technology will reduce the risk of product contamination, and help minimize the possibility of significant financial loss. TECAFORM™ AH ID can be used in a variety of food industry applications requiring good strength and toughness, dimensional stability, wear resistance and the ability to operate in a wet environment with little moisture absorption. Fillers, conveyors and forming equipment are among the pieces of food machinery that utilize TECAFORM's combination of properties. Typical applications are gears, wear strips, bushings, pump parts, form dies and rollers. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.48 | g/cm³ | ASTM D792 |
| Water Absorption | ASTM D570 | ||
| 23°C, 24 hr | 0.22 | % | ASTM D570 |
| Saturated, 23°C | 0.65 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale, 23°C) | 91 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3100 | MPa | ASTM D638 |
| Tensile Strength (Yield, 23°C) | 65.5 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 10 | % | ASTM D638 |
| Flexural Modulus (23°C) | 3380 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 103 | MPa | ASTM D790 |
| Compressive Strength (1% Strain) | 21.4 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (23°C) | 41 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 165 | °C | ASTM D2133 |
| CLTE - Flow | 1.4E-4 | cm/cm/°C | ASTM D696 |
| Maximum Service Temperature | |||
| Intermittent | 141 | °C | |
| Long Term | 100 | °C | UL 746B |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+12 | ohms | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Additional Information |
|---|
| Data obtained from extruded shapes material. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Precision Polymer N93B | Precision Polymer Engineering Ltd. | NBR | Precision Polymer |
| TUFNYL® RGF 33 BLUE | SRF Ltd. | Nylon 66 | TUFNYL® |
| CABELEC® CA3817 | Cabot Corporation | LLDPE | CABELEC® |
| Kumho KTR KTR-301 | Korea Kumho Petrochemical Co., Ltd. | SBS | Kumho KTR |
| CP PRYME® Polystyrene PS100-14M | Chase Plastics Services Inc. | PS (GPPS) | CP PRYME® Polystyrene |
