Order Products : sales@su-jiao.com

Sasol Polymers PE HR411

Category:	LLDPE , Linear Low Density Polyethylene
Manufacturer:	Sasol Polymers
Trademark:	Sasol Polymers PE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	o79Rgf_Sasol-Polymers-PE-HR411.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Features

High rigidity

Excellent impact strength

Excellent chemical resistance

Good ESCR

Tough and abrasion resistant

Colourable

Hexene copolymer

Applications

Large mouldings

Thick walled containers

Articles for indoor use

General Information
Additive	Antioxidation
Features	Rigidity, high High ESCR (Stress Cracking Resistance) Copolymer hexene comonomer Antioxidation Impact resistance, high Good coloring Good wear resistance Good chemical resistance Good toughness Compliance of Food Exposure
Uses	Container
Agency Ratings	EC 1935/2004 FDA 21 CFR 177.1520(a)(3)(i)(c)(1) FDA 21 CFR 177.1520(c) 3.1a
Forms	Particle
Processing Method	rotomolding Injection molding

Physical	Nominal Value	Unit	Test Method
Density	0.939	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	3.5	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance (100% Igepal CO-630, F50)	> 500	hr	ASTM D1693

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	61		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹			ASTM D638
Yield	19.0	MPa	ASTM D638
Fracture	24.0	MPa	ASTM D638
Tensile Elongation ²(Break)	820	%	ASTM D638
Flexural Modulus	846	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	121	°C	ASTM D1525
Impact test ³(-40°C, 5.00 mm)	350	J/cm	ASTM D3029

Injection	Nominal Value	Unit
Rear Temperature	150 - 180	°C
Middle Temperature	160 - 190	°C
Front Temperature	170 - 200	°C
Nozzle Temperature	190 - 220	°C
Processing (Melt) Temp	200 - 280	°C

Injection instructions
Zone 4: 180 to 210°C

Note Message
1 .	50 mm/min
2 .	50 mm/min
3 .	Tested on 5mm rotomoulded product

Resin Grade	Manufacturer	Category	Trademark
RAMTOUGH RZ236	Polyram Ram-On Industries	PC	RAMTOUGH
NuSil MED-4815	NuSil Technology	Silicone Rubber, LSR	NuSil
Deco-Coat™ UV Cure 7155™	Epoxies, Etc.	Epoxy	Deco-Coat™
Hostacom TKC 156N C12334	LyondellBasell Industries	PP Copolymer	Hostacom
Deprene 251-90	Shanghai Lin Gen Rubber Materials Co., Ltd.	PP+EPDM	Deprene