Order Products : sales@su-jiao.com

CONAP® CE-1170

Category:	Acrylic, Unspecified , Acrylic
Manufacturer:	Cytec Industries Inc.
Trademark:	CONAP®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	wLCtPP_CONAP-CE-1170.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
CONAP CE-1170 is a single-component air drying room temperature curing acrylic conformal coating that meets the requirements of MIL-I-46058-C for Type AR coatings. CONAP CE-1170 is a solvent-based coating designed for thin-film applications on components and printed circuitry. It was developed specifically for its fast drying time and reparability, as well as to provide the u ltimate in humidity resistance and hydrolytic stability while retaining excellent flexibility to prevent fracturing of fragile components during thermal cycling. Its electrical properties are outstanding. Cured films maintain excellent adhesion to phenolic and epoxy-glass laminates even in adverse environmental conditions. Components may be removed by heating the coating with a soldering iron, or the entire coating may be removed with a suitable solvent. A tracer dye has been incorporated to aid inspection under ultraviolet light.

Message

CONAP CE-1170 is a single-component air drying room temperature curing acrylic conformal coating that meets the requirements of MIL-I-46058-C for Type AR coatings.

CONAP CE-1170 is a solvent-based coating designed for thin-film applications on components and printed circuitry. It was developed specifically for its fast drying time and reparability, as well as to provide the u ltimate in humidity resistance and hydrolytic stability while retaining excellent flexibility to prevent fracturing of fragile components during thermal cycling. Its electrical properties are outstanding.

Cured films maintain excellent adhesion to phenolic and epoxy-glass laminates even in adverse environmental conditions. Components may be removed by heating the coating with a soldering iron, or the entire coating may be removed with a suitable solvent. A tracer dye has been incorporated to aid inspection under ultraviolet light.

General Information
Features	Fungus Resistant Good Electrical Properties Good Flexibility Halogen Free Humidity Resistant Hydrolytically Stable
Uses	Coating Applications Electrical/Electronic Applications Film
Agency Ratings	MIL I-46058C
Appearance	Amber
Forms	Liquid

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.948	g/cm³
Solids Content	31	%
Viscosity (25°C)	400	mPa·s	Brookfield

Flammability	Nominal Value	Unit
Flame Resistance	Self-extinguishing
Flash Point	13	°C

Additional Information	Nominal Value	Unit	Test Method
Fungal Resistance	Non-nutrient		ASTM G21

Electrical	Nominal Value	Unit
Volume Resistivity (25°C)	2.0E+15	ohms·cm
Dielectric Strength	> 120	kV/mm
Dielectric Constant (25°C, 100 Hz)	2.50 to 3.00
Dissipation Factor (25°C, 100 Hz)	0.010
Insulation Resistance ¹(25°C)	> 1.5E+16	ohms

Thermoset	Nominal Value	Unit	Test Method
Shelf Life (25°C)	78	wk

Note Message
1 .	Initially and 50% R.H.

Resin Grade	Manufacturer	Category	Trademark
Radilon® A RV300LK 339 E NER	Radici Plastics	Nylon 66	Radilon®
SUSTAMID 66 MO	Röchling Sustaplast SE & Co. KG	Nylon 66	SUSTAMID
NEXT SIGNATURE POMC HF-300	NEXT Specialty Resins, Inc.	Acetal (POM) Copolymer	NEXT SIGNATURE
NORYL™ BN31 resin	SABIC Innovative Plastics	PPE+PS	NORYL™
Hostacom HBC 327L NAT	LyondellBasell Industries	PP Homopolymer	Hostacom