Order Products : sales@su-jiao.com
EMERGE™ PC/ABS 7100 MED
| Category: | PC+ABS , Advanced Resin |
| Manufacturer: | Trinseo |
| Trademark: | EMERGE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | o3s5YL_EMERGEPCABS7100MED.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
EMERGE™ PC/ABS 7100 MED Advanced Resin exhibits a balance of properties between impact strength, heat resistance and processability. It has excellent flow and is ideal for injection molding in thin-wall applications. This resin is available in natural and custom colors. EMERGE PC/ABS 7100 MED resin is compliant with ISO 10993 (Biological Evaluation of Medical Devices) and is suitable for use in approved medical applications. Main Characteristics:
Applications:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.11 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 230°C/3.8 kg | 4.5 | g/10 min | ASTM D1238 |
| 260°C/5.0 kg | 25 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.50 - 0.70 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, 3.20 mm, Injection Molded) | 112 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (3.20 mm, Injection Molded) | 2210 | MPa | ASTM D638 |
| Tensile Strength 1(Yield, 3.20 mm, Injection Molded) | 50.3 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield, 3.20mm, injection molding | 4.0 | % | ASTM D638 |
| Fracture, 3.20mm, injection molding | 50 | % | ASTM D638 |
| Flexural Modulus (3.20 mm, Injection Molded) | 2340 | MPa | ASTM D790 |
| Flexural Strength (3.20 mm, Injection Molded) | 80.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -30°C, 3.20mm, injection molding | 290 | J/m | ASTM D256 |
| 23°C, 3.20mm, injection molding | 480 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, unannealed, 3.20mm, injection molding | 116 | °C | ASTM D648 |
| 1.8 MPa, unannealed, 3.20mm, injection molding | 95.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 133 | °C | ASTM D1525 2 |
| CLTE - Flow | 7.6E-5 | cm/cm/°C | ASTM D696 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating 3(1.0 mm) | HB | UL 94 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Drying Temperature |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Processing (Melt) Temp | 238 - 266 | °C | |
| Mold Temperature | 49 - 91 | °C |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 标准 B (120°C/h), 压 力1 (10N) |
| 3 . | This rating is not intended to reflect the danger caused by this or any other material under actual fire conditions. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1200-80A | RTP Company | TPE | RTP |
| Premier LD09519 - B | Premier Polymers, LLC. | LDPE | Premier |
| WPP PP PPH3MG3.5-Black | Washington Penn Plastic Co. Inc. | PP Homopolymer | WPP PP |
| Delta GPC-10 | Delta Polymers | PP Homopolymer | Delta |
| Indothene 1020FA20 | Reliance Industries Limited | LDPE | Indothene |
