Order Products : sales@su-jiao.com
Glastic® 1130
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | Glastic Corporation |
| Trademark: | Glastic® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | nnMpWn_Glastic-1130.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Glastic 1130 is a fiberglass-reinforcement thermoset polyester composite system which is available as sheet stock or in a variety of pultruded shapes. Glastic 1130 is formulated from a special methyl methacrylate modified neopentyl glycol-isophthalic acid unsaturated polyester resin. This type of resin has long been known for outstanding resistance to color fading caused by sunlight, and for resistance to surface erosion caused by weathering. This resin is also recognized for its performance in corrosive enviornments, including acids, bases and aliphatic hydrocarbons. It also meets the National Electrical manufacturers Association criteria for grade GPO-3. Glastic 1130 was developed to meet the challenging requirements of the NYCTA (New York City Transit Authority). It has been pultruded into channel shaped covers for the electrified third rail; and molded in flat panels for both a sign material and for switchgear components. Approved against NYCTA specifications 62, 64, and 65. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| UL File Number |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Water Absorption (24 hr) | 0.10 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 10300 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 101 | MPa | ASTM D638 |
| Flexural Modulus | 9720 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 141 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 600 | J/m | ASTM D256 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength 1(in Air) | 3.0 | kV/mm | ASTM D149 |
| Arc Resistance | 192 | sec | ASTM D495 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Additional Information |
|---|
| Tensile Strength, ASTM D638, Flow: 14600 psiTensile Strength, ASTM D638, Across Flow: 16000 psiTensile Modulus, ASTM D638, Flow: 1.49e6Tensile Modulus, ASTM D638, Across Flow: 1.49e6Flexural Strength at Yield, ASTM D790, Flow: 20400 psiFlexural Strength at Yield, ASTM D790, Across Flow: 23300 psiFlexural Modulus, ASTM D790, Flow: 1.41e6 psiFlexural Modulus, ASTM D790, Across Flow: 1.39e6 psiBonding Strength, NEMA 11.11: 6100 lbsDielectric Strength, ASTM D149, Flow, Condition A: 75 V/milDielectric Strength, ASTM D149, Flow, Condition D (48/50): 79 V/milDielectric Strength, ASTM D149, in Air, Across Flow, Method A (Short Time): 316 V/milInclined Plane Track Resistance, ASTM D2303: 870 minUL Standard 723 Flame Spread, ASTM E84: 20UL Standard 723 Fuel Contributed, ASTM E84: 0Radiant Panel Flame Spread, ASTM E162: 12 |
| Note Message | |
|---|---|
| 1 . | Method A (short time) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tarnamid® T-27 GF 10 GB 20 | Grupa Azoty S.A. | Nylon 6 | Tarnamid® |
| NORYL™ WCA955 resin | SABIC Innovative Plastics Asia Pacific | PPE+TPE | NORYL™ |
| Durethan® B 40 F 000000 | LANXESS Corporation | Nylon 6 | Durethan® |
| KOPA® KN133G15ST | Kolon Plastics, Inc. | Nylon 6 | KOPA® |
| Sylvin 8200-85 Brown 7440 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
