Order Products : sales@su-jiao.com
Wanthane® WHT-1685AD
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Wanhua Chemical Group Co., Ltd. |
| Trademark: | Wanthane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gpQ2hG_Wanthane-WHT-1685AD.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
WHT-1685AD is polyester-based TPU for extrusion molding applications, supplied in form of transparent, translucent, colorless or slightly yellowish film with good workability for high frequency soldering. Applications: Package, Exterior Decoration Parts, Fabric Coating. |
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.19 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 85 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 5.00 | MPa | ASTM D412 |
| 300% strain | 7.00 | MPa | ASTM D412 |
| Tensile Strength | 15.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 690 | % | ASTM D412 |
| Tear Strength | 65.0 | kN/m | ASTM D624 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -40.0 | °C | ASTM D3417 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Transmittance | 89.0 | % | ASTM D1003 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 - 110 | °C | |
| Drying Time | 2.0 - 3.0 | hr | |
| Cylinder Zone 1 Temp. | 165 | °C | |
| Cylinder Zone 2 Temp. | 170 | °C | |
| Cylinder Zone 3 Temp. | 175 | °C | |
| Cylinder Zone 4 Temp. | 180 | °C | |
| Cylinder Zone 5 Temp. | 180 - 185 | °C |
| Extrusion instructions |
|---|
| Extruder Feed Section: 160 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Cri-Line LC-512-55-BR | Cri-Tech, Inc. | Fluorelastomer | Cri-Line |
| Exxelor™ PO 1020 | ExxonMobil Chemical | TP, Unspecified | Exxelor™ |
| FORMULA P COMP 5220 | Putsch Kunststoffe GmbH | PP, Unspecified | FORMULA P |
| Generic ABS - Glass Bead | Generic | ABS | Generic |
| MAXATEL® ACGC25A-NAT | Pier One Polymers, Inc. | Acetal (POM) Copolymer | MAXATEL® |
