Order Products : sales@su-jiao.com
KOPEL® KP3335HR
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Kolon Plastics, Inc. |
| Trademark: | KOPEL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | naa5xr_KOPELKP3335HR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| low modulus injection/extrusion grade with 35 shore D hardness |
| General Information | |
|---|---|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.11 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (200°C/2.16 kg) | 18 | g/10 min | ISO 1133 |
| Molding Shrinkage | ISO 294-4 | ||
| Transverse flow | 0.83 | % | ISO 294-4 |
| Flow | 0.92 | % | ISO 294-4 |
| Water Absorption (23°C, 24 hr) | 0.62 | % | ISO 62 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 38 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (23°C) | 14.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | 900 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 60.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | No Break | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 100 | °C | ISO 306 |
| Melting Temperature | 165 | °C | ISO 11357-3 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (0.8 mm) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature - Desiccant Dryer | 100 - 110 | °C | |
| Drying Time - Desiccant Dryer | 3.0 - 6.0 | hr | |
| Suggested Max Moisture | < 0.080 | % | |
| Rear Temperature | 140 - 160 | °C | |
| Middle Temperature | 160 - 190 | °C | |
| Front Temperature | 170 - 200 | °C | |
| Nozzle Temperature | 190 - 200 | °C | |
| Mold Temperature | 30 - 80 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MAXTEL® 630-BK | MRC Polymers, Inc. | PP Copolymer | MAXTEL® |
| RAMOFIN PPC717 | Polyram Ram-On Industries | PP Copolymer | RAMOFIN |
| IPC PP 4830H-MLGF8-R2-UV | International Polymers Corporation | PP, Unspecified | IPC PP |
| KEBATRON® PPS C1040G5 | BARLOG plastics GmbH | PPS | KEBATRON® |
| Lucent PP GPP-310 | Lucent Polymers, Inc. | PP, Unspecified | Lucent PP |
