| Category: | PEEK , Polyetheretherketone |
| Manufacturer: | Greene, Tweed & Co. |
| Trademark: | WR® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | cB62BB_WR-525.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
|
WR® 525 is a thermoplastics composite consisting of carbon fiber in a PEEK™ matrix. WR provides excellent chemical resistance, non-galling and nonseizing properties, impact resistance and thermal shock and hydrolysis resistance. WR 525 allows the pump user to increase pump efficiency by running tighter wear rings clearances while decreasing potential pump damage when pumos are cavitated or experience down-line bearing failures. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.63 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 98 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | ASTM D3039 | ||
| -- 1 | 10200 | MPa | |
| -- 2 | 138000 | MPa | |
| Tensile Strength | ASTM D3039 | ||
| Break 3 | 86.2 | MPa | |
| Break 4 | 207 | MPa | |
| Compressive Modulus 5 | 124000 | MPa | ASTM D695 |
| Compressive Strength 6 | 1360 | MPa | ASTM D695 |
| Thermal | Nominal Value | ||
|---|---|---|---|
| Maximum Service Temperature | 525 |
| Note Message | |
|---|---|
| 1 . | Perpendicular to fiber |
| 2 . | Parallel to fiber |
| 3 . | Perpendicular to fiber |
| 4 . | Parallel to fiber |
| 5 . | Parallel to fiber |
| 6 . | Parallel to fiber |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Propafilm™ RGP80 | Innovia Films Ltd. | PP Alloy | Propafilm™ |
| SABIC® PPcompound 55T1030 | Saudi Basic Industries Corporation (SABIC) | PP Copolymer | SABIC® PPcompound |
| Unichem 7233 | Colorite Polymers | PVC, Unspecified | Unichem |
| Cellidor CP 330-10 | ALBIS PLASTIC GmbH | CAP | Cellidor |
| OPNYL OP66GF60 | Ovation Polymers Inc. | Nylon 66 | OPNYL |