Order Products : sales@su-jiao.com
RTP 1503-72D
| Category: | TEEE , Thermoplastic Elastomer, Ether-Ester |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mvW7qS_RTP-1503-72D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Glass Fiber |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.40 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 0.35 - 0.45 | % | ASTM D955 |
| Moisture Content | % |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Primary Additive | 20 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3310 | MPa | ASTM D638 |
| Tensile Strength | 57.6 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 7.3 | % | ASTM D638 |
| Flexural Modulus | 2550 | MPa | ASTM D790 |
| Flexural Strength | 75.8 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.20 mm) | 140 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.20 mm) | 850 | J/m | ASTM D4812 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 107 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Processing (Melt) Temp | 218 - 246 | °C | |
| Mold Temperature | 21.1 - 37.8 | °C | |
| Injection Pressure | 68.9 - 103 | MPa |
| Injection instructions |
|---|
| Desiccant Type Dryer Required. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ronalen M25 | Roonamid a.s. | PP, Unspecified | Ronalen |
| SILPURAN® 2450 A/B | Wacker Chemie AG | Silicone | SILPURAN® |
| Toler PE PE545 | Toler Chemical, Inc | HDPE | Toler PE |
| NEMCON H PC DP164 | Ovation Polymers Inc. | PC | NEMCON H |
| Fluoroplex F 15 - GMF | UNIFLON | PTFE | Fluoroplex |
