Order Products : sales@su-jiao.com

Pinnacle PP 1508

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	Pinnacle Polymers
Trademark:	Pinnacle PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	n8SncZ_Pinnacle-PP-1508.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
7.9 MELT FLOW HOMOPOLYMER FOR FIBER SPINNING Pinnacle Polymers Polypropylene 1508 is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency. This product is intended for fiber spinning and other critical extrusion applications. The 1508 product provides: Excellent color and processing stability Superior fiber spinning characteristics Resistant to gas fading Excellent UV stability Excellent cleanliness Pinnacle's polypropylene, as marketed by Pinnacle Polymers, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.

Message

7.9 MELT FLOW HOMOPOLYMER FOR FIBER SPINNING

Pinnacle Polymers Polypropylene 1508 is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.

This product is intended for fiber spinning and other critical extrusion applications.

The 1508 product provides:

Excellent color and processing stability

Superior fiber spinning characteristics

Resistant to gas fading

Excellent UV stability

Excellent cleanliness

Pinnacle's polypropylene, as marketed by Pinnacle Polymers, in natural, uncolored pellet form complies with appropriate requirements of CFR Title 21, Part 177, Subpart B, Section 177.1520 (c) 1.1a entitled "Olefin Polymers" of the Food Additives Amendment of 1958 to the United States Food, Drug and Cosmetic Act of 1938.

General Information
Features	Clean/High Purity Food Contact Acceptable Gas-fading Resistant Good Color Stability Good Processing Stability Good UV Resistance Homopolymer
Uses	Fibers
Agency Ratings	FDA 21 CFR 177.1520(c) 1.1a
Forms	Pellets
Processing Method	Extrusion Fiber (Spinning) Extrusion

Physical	Nominal Value	Unit	Test Method
Density	0.900	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	7.9	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield, 3.20 mm, Injection Molded)	35.2	MPa	ASTM D638
Tensile Elongation ²(Yield, 3.20 mm, Injection Molded)	9.0	%	ASTM D638
Flexural Modulus - 1% Secant ³(3.20 mm, Injection Molded)	1660	MPa	ASTM D790A

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact ⁴(23°C, 3.20 mm, Injection Molded)	32	J/m	ASTM D256

Note Message
1 .	Type I, 51 mm/min
2 .	Type I, 51 mm/min
3 .	Type I, 1.3 mm/min
4 .	Type I

Resin Grade	Manufacturer	Category	Trademark
Purell 2007H	LyondellBasell Industries	LDPE	Purell
Unipren® Elastomers A3 PRTA010 80A UP306	Petropol Industry and Trade of Polymers LTDA	SEBS	Unipren® Elastomers
APEX® 74-8126P-6	Teknor Apex Company	PVC, Flexible	APEX®
Polifor® C 30 TR/20 H GRIGIO 7306	SO.F.TER. SPA	PP Copolymer	Polifor®
Sylvin 9067-90 Yellow 405	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin