Order Products : sales@su-jiao.com
SureSpec LLC4-020
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Genesis Polymers |
| Trademark: | SureSpec |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | mgkDuO_SureSpec-LLC4-020.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LLC4-020 is a Butene-comonomer certified prime resin designed for Cast or Blown film for Stretch-Cling and General Purpose applications. LLC4-020 features easy processability, good film strength and a broad heat sealing range. LLC4-020 complies with FDA regulation 21CFR 177.1520(c) 3.1a. LLC4-020 contains no slip and no antiblock. Also Available in: B = Barefoot A= 0 Slip / High Anti Block (0/6500) F = Full Adds (1500/6500) |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 25 | µm | |
| Secant Modulus - 1% Secant, MD (25 µm) | 172 | MPa | ASTM D882 |
| Tensile Strength - MD | ASTM D882 | ||
| Yield, 25 µm | 10.0 | MPa | |
| Break, 25 µm | 32.0 | MPa | |
| Tensile Elongation - MD (Break, 25 µm) | 650 | % | ASTM D882 |
| Dart Drop Impact 1(25 µm) | 95 | g | ASTM D1709A |
| Elmendorf Tear Strength - MD (25 µm) | 100 | g | ASTM D1922 |
| Note Message | |
|---|---|
| 1 . | F50 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PrimoPrene 40D-1000 | KMI Group Inc. | TPV | PrimoPrene |
| QR Resin QR-8000 | QTR, Inc. | PBT | QR Resin |
| Bergamid™ A70 G10 H NC030 | PolyOne Corporation | Nylon 66 | Bergamid™ |
| ESPOLEX WT515 | Sumitomo Chemical America, Inc. | TPO (POE) | ESPOLEX |
| LUVOCOM® 80-8883 | LEHVOSS Group | Acetal (POM) Copolymer | LUVOCOM® |
